Shop Bosch | Brands We Sell

The Bosch B901 Access Control Interface Module is a fully supervised, addressable SDI/SDI2 bus device that allows access control integration for Bosch compatible control panels. This module offers 14 programmable levels of access authority. Authority for access is controlled by the user level, the group of the user, the time of day, the door state, and the area armed state. Control each authority restriction through automatic and manual functions. A door that has been automatically released by the control panel will require manually re-engaging to return to normal.

The Bosch B450 Conettix Plug-in Communicator Interfaces work with plug-in communicators for primary or backup alarm communication, remote programming, and other remote applications. The plug-in communicator interface supports Conettix IP protocol with full authentication, 256-bit AES encryption, and resistance to Denial of Service attacks. The interface also supports compatible Bosch control panels with SIA DC-09, CSV-IP. The interface is a reliable way to add cellular network communications to existing or new commercial security and fire installations.

The B4512 Control Panel integrates intrusion and residential fire, providing one simple user interface for both systems. The B4512 provides up to 28 individually identified points that can be split into 2 areas. The control panel includes a built-in Ethernet port for IP network communications, and is compatible with modules that send events to selected public switched telephone network (PSTN), IP network, or cellular network destinations through four programmable route groups. With the B4512, you can monitor doors, windows, and motion within areas like showrooms or those that hold inventory. Each user can have a personalized passcode, a wireless keyfob, and a credential to control the system.

The B810 is a wireless receiver that connects RADION wireless peripherals such as the motion and specialty detectors, keyfobs, panic buttons, door window contacts, repeaters, and more, to supported Bosch control panels using the SDI2 Bus connection. The receiver supports RF communication at 433.42MHz This frequency features improved penetration, reflection, and refraction of signal for superior range, and reliability. The receiver also features dual antennas to achieve spatial and polar diversity to further improve RF communication reliability. Enclosed within the receiver housing for higher security, the receiver is equipped with tamper protection, and detects and reports radio frequency interferences. The receiver supports supervision of wireless points (504), key fobs (1000), and repeaters (8). The receiver can be easily accessed and configured for a compatible control panel using the address switch on the back of the receiver housing. The receiver address switch provides a single-d

The B920 Two-line Alphanumeric Keypad (SDI2) is a SDI2 bus compatible device. Each keypad has user adjustable options such as volume and display brightness. The B920 shows two-line system messages for all areas.

Dynacord C Series amplifiers are dedicated installation DSP amplifiers optimized for 24/7 operation. Integrated digital signal proccesing provides access to professional speaker processing with FIR Drive technology. C Series amplifier utilize Class A/B resp. Class H topologies, which provide market leading acoustic performance and reliability. The connectivity is optimized for the needs of fixed install applications. For low cost of ownership a power saving standby mode is available. A front panel LC display allows local control and supervision of the amplifier. An intuitive system control software allows fast system setup, flexible system control and comprehensive supervision.

Fulfill your security needs with Bosch ISC-PDL1-WA18GB Professional Motion Sensor. This motion sensor incorporates the state-of-the-art Sensor data fusion technology to provide superior surveillance. The range adaptive radar detects motion up to 10ft distance. This device is also equipped with Tri-focus optics technology for optimal performance.

The BOSCH-DS1110I is a glassbreak tester that produces synthesized sounds that mimic those of broken glass. This tester is used to test the DS1101i, DS1102i, DS1103i, and DS1108i glassbreak detectors for accurate operation.

Featuring built-in PIR and microwave detection sensors and tri-focus optics technology, the ISC-PDL1-W18G Professional Series TriTech+ Motion Detector from Bosch uses optics with three focal lengths for long-, medium-, and short-range coverage. Its 90° field of view covers a 60 × 80’ area, or a narrowed 25 × 33’ area. Sensor Data Fusion technology analyzes signals from all five sensors including two pyroelectric sensors, a range adaptive finder, a room temperature sensor, and a white light level sensor to provide accurate detection.
The detector adjusts its sensitivity to compensate for weather, ensuring accurate operation in varying weather conditions, and features self-adjusting LED brightness to automatically adjust to surrounding light levels. There is a blue LED that indicates an alarm condition and activates during a remote walk test. The detector is immune to drafts, insects, and small animals under 10 lb, helping to reduce false alarms. Installation is quick with its self-locki

Kit Includes B4512, B11, CX4010, B430, B920.
The B4512 Control Panel integrates intrusion and residential fire, providing one simple user interface for both systems. The B4512 provides up to 28 individually identified points that can be split into 2 areas. The control panel includes a built-in Ethernet port for IP network communications, and is compatible with modules that send events to selected public switched telephone network (PSTN), IP network, or cellular network destinations through four programmable route groups. With the B4512, you can monitor doors, windows, and motion within areas like showrooms or those that hold inventory. Each user can have a personalized passcode, a wireless keyfob, and a credential to control the system.
The B11 Small Control Panel Enclosure houses many Bosch control panels and modules. The enclosures are compatible with an enclosure tamper switch (D110 or ICP-EZTS), lock and key set (D101), and can hold one battery (up to 7 Ah).
The CX4010 is for use i