Shop DORMAKABA USA INC . | Brands We Sell

ACU/ECU Firmware upgrade to highest supported version supported by board type PC1095 or PC1097. ACU/ECU System Serial Number will be required as this is a custom serialized chip. Will require the Blue Board Three Letter and four number serial number.?We recommend you also provide the board model type (eg: CA8500) for firmware validation.
This part replaces: FWS2595; FWS4595; FWS8595; FWSE195; FWSE295; FWS2597; FWS4597; FWS8597; FWSE197; FWSE297; and FWSC157.

PSM-2P-H is an ISO-quality 125kHz PVC graphics card. This credential is compatible with Keyscan, HID, and Farpointe 125 kHz readers. Compatible with CR80 dye-sublimation printers. Keyscan 36-bit programming. Card batch and number printed for easy identification. This credential works with Keyscan K-PROX3, K-PROX2, K-KPR, K-VAN; Farpointe P-300, P-620-H, P-710-H, P-900-H, and 125 kHz Wiegand readers.

The MultiMag® series of electromagnetic locks are designed for easy installation and multi-purpose operation for interior or perimeter doors. The mounting bracket has keyhole mounting to support the magnet, freeing the installer’s hands to affix the magnet mounting screws. The removable cavity cover offers quick, easy access to wiring. The RCI 8310 MultiMag® applies to single outswinging doors, while the RCI 8320 MultiMag® is for double outswinging doors. For additional security monitoring these electromagnetic locks offer optional door status & security condition sensors.

The 4 series centerline strike accommodates ¾” latch projections. Its various faceplate options and 1-1/2” cut-out depth accommodates most door frame types and materials. Installation is simple with standard mounting tabs and included fasteners. Crossed wires are never a problem, as the coil is not polarity sensitive. The RCI 4 series centerline strikes are available with an optional 1-1/2 hour fire-rating. 41 Series depicts fail-secure and 43 Series depicts fail-safe.

The 991 pneumatic time delay push button is available in handicap and exit switch configurations. The handicap button is blue with an engraved handicap symbol and is capable of a 1-45 second time delay. The exit button is red and engraved with “PUSH TO EXIT” and is capable of a 1-45 second time delay. The RCI 991 pneumatic time delay button is tamper-resistant mounting cannot be burned or pried off.

Our low-profile MiniMags have been extremely popular for interior traffic control. These short electromagnetic locks install perfectly alongside most automatic door operators or stop-mounted door hardware, reducing installation time and eliminating the need for extra brackets.?The MiniMags design of 1-7/8” width helps keep undersized openings within code. This is the ideal magnet for use on narrow-style aluminum doors!

Our low-profile MiniMags have been extremely popular for interior traffic control. These short electromagnetic locks install perfectly alongside most automatic door operators or stop-mounted door hardware, reducing installation time and eliminating the need for extra brackets.?The MiniMags design of 1-7/8” width helps keep undersized openings within code. This is the ideal magnet for use on narrow-style aluminum doors!

This unit was designed to reduce the heat, the current and extend the life of the solenoids used in locking devices energized for long periods of time (1/2 hour to always on). The ICEPK uses Pulse Width Modulation which rapidly pulses power to the lock. This allows the lock to draw less cur- rent and operate cooler due to the brief “off” cycles occurring several thousand times per second. When the solenoid operates cooler, the life of the solenoid is extended significantly.