Shop DORMAKABA USA INC . | Brands We Sell

The Rutherford Controls 908-MO (32D) is a Push To Exit Button Switch, with a Red Cap finish. The Switch Mode is designed for Momentary Action, with a 1 x SPST N/O & 1 SPST N/C Switch Configuration. The 908-MO Switch Rating is 10A @ 24VDC UL/CSA. The 908-MO-32D is an ideal Request to Exit switch.

Rutherford Controls SP03 × 28 8310 Spacer x 28 1/2“x1 1/2“x10 1/2”

The RCI 910TC Series touchless switches is designed for touchless door activation in any facility. It functions by triggering activation of automatic door openers by hand gesture or use of a remote fob. It can make the difference when it comes to a clean, hygienic facility. The 910TC Series is ideal for use in healthcare facilities, restaurants, schools, offices and restrooms by minimizing touchpoints.

Combines the convenience of a long range radio fre- quency FoB with an onboard proximity chip for use with proximity HID 125kHz (K-TX2), INDALA (K-INTX2) readers and Keyscan K-SMART 13.56MHz readers (K- TX2-1K).
Receiver is contained in a weather resistant NEMA 4, IP65 enclosure and is suitable for outdoor installations.
Ideal for security access control applications such as se- curing garage or gate entries and/or exits.?Receiver provides four hardwired 36bit Keyscan Wiegand outputs for connection to Keyscan’s family of ac cess control units (ACUs)*. Four Wiegand outputs provide an ideal solution for multiple gate control using a single receiver.
Transmitters offer four-buttons, and are designed to support multiple gate and multiple receiver installations.
Receiver offers innovative RF sensitivity and range con- trol. Range may be adjusted from 12” (0.3m) to a factory defaulted maximum of 150’ (45.7m).
RF operation uses an ultra high 433MHz Frequency.
Employs a rolling 40 bit code com

The RCI 7105-05D-32D electric strike series are used with aluminum, cylindrical, centerline mortise lock and exit devices. These electric strikes allow installers to adjust the strike pivot horizontally for precise alignment and unique anti-vibration design prevents manipulation by vibration. Crossed wires are never a problem, as the coil is non polarity-conscious.

The TD365 timer is fully programmable, operates 24 hours/365 days, and can schedule 40 holidays and perform up to 99 daily/weekly independent timer events. Each of these events may be programmed to occur at any time, or day of the week. The “First Person In” feature is designed to delay the automatic disarming of a security system until a person with authorized access arrives. If nobody arrives, the associated event will be overridden and the security system will remain armed. The RCI TD365 has 2 momentary or latching SPDT relays to control locks and other electronically controlled devices or circuits. This makes the RCI TD365 day timer an ideal solution for openings with scheduled access.

The encrypted NETCOM6P TCP/IP converter plugs directly into a CIM module or Keyscan Access Control Panel to facilitate network connection. TheNETCOM6P uses the NIST-approved AES Rijndael encryption technique for secure communications. A 128-bit, 192-bit, or 256-bit user-defined encryption key decreases communication breaches. NETCOM6P incorporates Keyscan NECOM Program Tool for custom installation programming to adapt to any TCP/IP network topology for access control system communication.

The 6 series centerline strikes are available in standard profile or low-profile options to accommodate different latch projections. This heavy-duty series combines several requested key features. Standard features include a multi-voltage single solenoid, selectable lock mode (no tools necessary), horizontal adjustment, and plug-in wire connectors. ¼” horizontal adjustment makes installations faster and easier. Plus, with the RCI 6 series there will be less pressure on installer’s strike inventory, because these RCI strikes do it all.

The OCB8 is a dependable Form-C relay output board for Keyscan’s door and elevator floor controllers and ancillary equipment. The Keyscan OCB8 adds doors and elevator floor stops. OCB8 may activate secondary reactions including sirens, alarms, and strobe lights with Keyscan EC1500, EC2500, CA4500, or CA8500 controllers. The OCB8 has a DIP switch bank for quick relay status adjustments.

For aluminum blade stop frames. Used to lower the magnet to align with armature plate.
Compatible With 8371 electromagnetic lock