Shop DORTRONICS SYSTEMS INC | Brands We Sell

Dortronics W5286-P23DAxE1 5286 Series Single Gang Push Plate Switch, Pneumatic 2-60 Second Delay, Form Z, 1-1/2” Wide Push Plate, 3” Wide Back Plate, “PUSH TO EXIT” in Black Letters

Standard 5286 exit release switches feature a large, easily operated, 1-1/2” x 3” push plate. The push plate is available in two sizes and three different back mounting plates to meet all installation requirements. Both the push plates and the back mounting plates have smooth beveled edges on all four sides to enhance appearance. These assemblies are joined from the back with concealed screws to resist tampering.

The 4204NX Power Supply provides a field selectable 12 or 24 volt DC output. The required output voltage is accurately regulated, even when operating under maximum and varying load conditions.

Standard 5286 exit release switches feature a large, easily operated, 1-1/2” x 3” push plate. The push plate is available in two sizes and three different back mounting plates to meet all installation requirements. Both the push plates and the back mounting plates have smooth beveled edges on all four sides to enhance appearance. These assemblies are joined from the back with concealed screws to resist tampering.

The 1000 Series electromagnetic locks can be used in harsh environments to secure doors and gates. All electronics are sealed in epoxy and are protected by the Stainless Steel housing cover. The housing, armature and exposed face of the electric lock are nickel plated to resist rust and corrosion. A rigid conduit fitting can be provided on one end of the lock to protect power wiring in gate control installations.

The ML-1100 mortised electromagnetic locks are ideal for many different applications. These mortise locks can be utilized with the Dortronics DPA door pulls for an attractive architectural appearance, while providing unsurpassed security functionality. Using the DPA series pull with a ML series mortise lock allows the force of the magnet to be directly opposite the direction of pull; therefore, no mechanical advantage is gained when force is applied to the pull handle. There is no chance of racking the door. Steel or aluminum framed doors are susceptible to permanent damage when the lock is header mounted and the door handle is pulled repeatedly (while the door is locked).

The MM-300 electromagnetic lock is ideal for locking small pass thru doors, server cabinets and drawers in low level security areas. Creating 300 pounds of direct holding force, they provide a reliable method of access control. Locks can be mounted on cabinets with either out-swing or in-swing door action.