Search in Brand
Filter Your Search
Shop by Category
Shop Eaton | Brands We Sell
Eaton Eluxa horn strobe, LED, wall, white, FIRE, clear lens, 15/30/75/110/135/185 cd, 24V, indoor
Ability to mix LED and xenon strobes in the same field of view
Meets stringent synchronizing standards for strobes with Wheelock’s DSM Sync Modules, PS Power Supplies or SAFEPATH products
Energy efficient: LED technology provides industry’s lowest current draw, Fewer power supplies required, smaller wire gage, reduced wire runs
Eaton Red Waterproof Back Box for Mounting Horn Strobes
The WBB-R is a weather resistant back box with sturdy cast housing, threaded conduit hole and knockout for outdoor applications.
Eaton Eluxa LED Horn, White, Ceiling, 12/24V, Indoor
Ceiling Mount Horn
Main Features
Compact, low-profile, aesthetically pleasing design
3 horn patterns
Continuous, T3 and T3/T4
Finger slide Switches
Mounting plate included
Energy Efficient
Eaton Wheelock Exceder horn strobe, xenon, ceiling, red, FIRE, clear lens, 90/95/99 cd, 12/24V, indoor
The Wheelock® Exceder Horn Strobe incorporates high reliability and high efficiency optics to minimize current draw allowing for a greater number of appliances on the notification appliance circuit. All strobe models feature an industry first of 8 candela settings on a single appliance. Models with an audible feature 3 sound settings (90, 95, 99 dB). All switches to change settings, can be set without the use of a tool and are on the back of the appliance to prevent tampering.
Wall models feature voltage test points to take readings with a voltage meter for troubleshooting and AHJ inspection. Both stylish and inspiring, architects and engineers can now specify the industry’s sleekest looking fire notification appliance, while being afforded all the features and benefits that provide the industry’s lowest total cost of ownership.
Eaton Wheelock Ceiling Fire Alarm Strobe Light 24V ELSTRC ELUXA
The Wheelock Ceiling Fire Alarm Strobe Light 24V ELSTRC ELUXA is one of the best fire alarm and CO alarm options in the market, thanks to the six different candela settings for the strobe light available in one device: 15, 30, 75, 110, 150, 177 cd. Activation is accomplished through digital communication. The Wheelock fire alarm feature an advanced power saving LED technology in a sleek and modern design that will blend with the building‘s interior decor.
To reduce installation time, Eluxa includes pre-wire/ pre-test via a rigid mounting plate with hinged feature and no tools needed for setting changes. This fire alarm strobe light is suitable for 24V.
Eaton ELSPSTW Eluxa LED High Fidelity Speaker Strobe, White, Wall
High-fidelity sound output
High intelligibility with a frequency range—300 to 8000 HZ— widest range in the industry
Low frequency requirements of UL 464 (520 Hz) to meet NFPA’s 520 Hz tone requirements for sleeping areas
Input Voltage: Selectable 25/70 VRMS
Eaton Wheelock Exceder horn strobe, xenon, wall, white, FIRE, clear lens, 15,1575,30/75/95/110/135/185 cd, 12/24V, indoor
Standard Features:
Industry’s most innovative design – Sleek modern aesthetics and styling, Easier to install
5 Mounting Options – 1 gang, 2 gang, 4”sq., 3.5 octal, 4” octal box
Voltage test points for quick troubleshooting and easy spot checking
1/16” deep mounting error relief
Prewire capability to check for wiring & ground faults prior to appliance installation
Contact cover not only provides protection from dirt, dust, paint and accidental damage, it allows for prewire testing and troubleshooting
Eaton Led Trim Kit Red
The Cooper Wheelock ESB-KIT-R is a red trim plate kit for the Exceder LED.
Eaton Wheelock MB motor bell, vibrating, red, 6", 24 VAC, indoor/outdoor mounting options available
Wheelock MB-G6-24-R Motor Bells provide a better engineering motor bell for fire and life safety alarm systems. Wheelock Motor Bells are perfect for industrial uses including schools, hospitals, and commercial buildings. The Wheelock Series MB Bells include higher dBA, low current draw, built-in trimplate for semi-flush mounting, low frequency aluminum shells, and low RFI noise. The motor for Series MB Bells is a durable, high torque permanent magnet motor selected for its high performance and long life. These DC vibrating Series MB Motor Bells are offered in 6” and 10” shell sizes in both 12 and 24 VDC models
Eaton STW Wheelock Exceder Strobe - Wall Mount - White
Standard Features:
Industry’s most innovative design – Sleek modern aesthetics and styling, Easier to install
5 Mounting Options – 1 gang, 2 gang, 4”sq., 3.5 octal, 4” octal box
Voltage test points for quick troubleshooting and easy spot checking
1/16” deep mounting error relief
Prewire capability to check for wiring & ground faults prior to appliance installation
Contact cover not only provides protection from dirt, dust, paint and accidental damage, it allows for prewire testing and troubleshooting