Shop Eaton | Brands We Sell

The SSB-4 is a rust resistant steel, load bearing support for 4” O.D. loudspeaker assemblies in a drop-tile ceiling grid. Easy “mark & cut” “square” hole design for fast and efficient installation. Multiple seismic tie-off points are provided. Tinnerman clips provide easy screw threading, quick mount tabs hold the back box in place without screws, and locating tabs provide secure mounting positions in ceiling tiles.

The Wheelock® Exceder™ strobes feature a sleek modern design that will please building owners with reduced total cost of ownership. Installers will benefit from its comprehensive feature list, including the most candela options in one appliance, low current draw, no tools needed for setting changes, voltage test points, 12/24 VDC operation, universal mounting base and multiple mounting options for both new and retrofit construction. The Wheelock® ExcederTM Series incorporates high reliability and high efficiency optics to minimize current draw allowing for a greater number of appliances on the notification appliance circuit. All strobe models feature an industry first of 8 candela settings on a single appliance. Models with an audible feature 3 sound settings (90, 95, 99 dB). All switches to change settings, can be set without the use of a tool and are located behind the appliance to prevent tampering. Wall models feature voltage test points to take readings with a voltage meter for tr

The Wheelock POWERPATH Power Supply (PS-8-LP) is a supervised remote power supply/battery charger in a low profile cabinet that is used for supervision and expanded power driving capability of fire alarm Notification Appliance Circuits (NACs). The PS-8-LP is filtered and regulated and provides 8 amps of power distributed across 4 outputs.
The PS-8-LP features 2 Class B or 2 Class A inputs, input to output follow mode and audible silence capability, dip switch programming and LED latching option, 2 Relays – AC fail and common trouble , and programmable AC loss relay delay. It also provides POWERPATH to POWERPATH panel synchronization and 2.5 amp auxiliary power w/ reset capability.

Product Features

LOW OPERATING CURRENT DRAW

COMPATIBLE WITH ALL STANDARD FIRE ALARM CONTROL PANELS

CONTROLLER FOR SYNCHRONIZING AUDIBLE, STROBE & AUDIBLE STROBE PRODUCTS WITH SYNC CAPABILITY TWO CLASS “B” CIRCUITS OR ONE CLASS “A”

Series E Speakers and Speaker Strobes are designed for high efficiency sound output with field selectable input voltage (25/70 VRMS) and field selectable taps from 1/8 to 2 watts.

Round design with white finish to blend in with most ceilings
Ceiling-mounted for efficient sound and light distribution
Complies with UL standards for fire alarm systems and emergency communication systems

EXCEDER ADAPTER KIT (ESB-KIT) The Led Trim Kit White Surface Backbox is UL and ULC listed to allow Cooper Wheelock Exceder LED wall horn, strobe and horn/strobe appliances to be surface mounted. The Adapter Kit (EBS-KIT) allows the same appliances to be mounted to a standard recessed single-gang or 4-inch sq. electrical back box.

The Wheelock Exceder strobes feature a sleek modern design that will please building owners with reduced total cost of ownership. Installers will benefit from its comprehensive feature list, including the most candela options in one appliance, low current draw, no tools needed for setting changes, voltage test points, 12/24 VDC operation, universal mounting base and multiple mounting options for both new and retrofit construction. ??The Wheelock ExcederTM Series incorporates high reliability and high efficiency optics to minimize current draw allowing for a greater number of appliances on the notification appliance circuit. All strobe models feature an industry first of 8 candela settings on a single appliance. Models with an audible feature 3 sound settings (90, 95, 99 dB). All switches to change settings, can be set without the use of a tool and are located behind the appliance to prevent tampering. Wall models feature voltage test points to take readings with a voltage meter for tro

Eaton Wheelock AS horn strobe, xenon, wall, white, FIRE, clear lens, 30 cd indoor, 115/180 cd outdoor, 24V

The Wheelock patented Series RSS Strobe Appliances and Series RSSP Strobe Plates have lower current draw while maintaining outstanding performance, reliability and cost effectiveness. These versatile appliances will satisfy virtually all requirements for indoor, wall or ceiling mount applications. Strobe options for wall mount models include 1575 or the Wheelock Patented MCW multi-candela strobe with field selectable candela settings of 15/30/75/110cd or the high intensity MCWH strobe with field selectable 135/185cd. Ceiling mount models include the patented MCC multi-candela ceiling strobe with field selectable intensities of 15/30/75/95cd or the high intensity MCCH strobe with field selectable 115/177cd.

The IOB-W from Wheelock is a Back Box designed for the ET70WPSpeaker Strobes. MT Series, HS4/HS, and AMT