Shop ERICO | Brands We Sell

Spring steel beam clamp for 1/4 and 3/8 inch threaded rod. Clamp has a static load of 100 pounds.

Easy to install heavy duty electrical box hanger for acoustical ceiling applications. Adjustable for 1 1/2” and 2 1/8” boxes, hardware included.

CADDY® Galvanized finish on J-Hooks provide smoother cable pull and greater corrosion resistance.

CADDY® CABLECAT 3/4 in. dia. J-hook assembled to 4Z34. For No. 12 thru 1/4 in. wire, plain or threaded rod and 1/8 thru 3/8 in. flange.

Features
Provides a bracket for mounting low voltage Class 2 communication outlets
Reduces bulges in the dry wall caused by plaster rings
May be installed to the front or the side of the metal or wood stud
Side support provides for a rigid installation
Attaches with self-tapping screws or nails
Works with wood or metal studs
Material: Steel
Finish: Pre-galvanized
Gang: 1
Drywall Thickness: 1/2” – 5/8”
Height (H): 4 1/2”
Width (W): 4”
A: 2.67”
Hole Size 1 (HS1): 0.16”

Features
Combine bridle rings with other nVent CADDY fasteners to support cables from flange, purlin, drop wire, t-grid, etc.
Material: Steel
Finish: Electrogalvanized
Diameter: 1 1/4”
Screw Diameter: 14”
Screw Type: Wood
Screw Length: 3/4”
Ultimate Static Load: 50lb

Features
Provides positive support with locking screws
Makes wire “fishing” easier
Install with a drywall saw and screwdriver
Eliminates the need for an electrical box when installing low voltage Class 2 wiring

Features
Dual height feature permits 1-1/2” (38 mm) deep electrical box to be mounted flush with tile or offset 3/4” (19 mm) for plaster ring
Allows 2-1/8” (54 mm) deep electrical box to be mounted flush with tile
Snaps easily onto T-Grid
Hanger comes complete with box mounting clip and screw
Material: Steel;Spring Steel
Finish: Pre-galvanized nVent CADDY Armour
T-Grid Span: 24”
Ultimate Static Load: 20 lb

J-Hooks have a wide base design and smooth beveled edges to provide a large bending radius for current and future high-performance data cables and fibre optics. nVent CADDY Cat HP J-Hooks are available in a wide range of sizes to offer a solution that meets industry standards for Cat 6A and easily accommodates Cat 7, large-diameter fibre optic, innerduct and coax cable. Individual nVent CADDY Cat HP J-Hooks can be fastened directly to the building structure or can be used to expand existing nVent CADDY Cat HP J-Hook cable supports. The J-Hooks are designed to provide a strong and stable pathway support installation.

Features
Combine bridle rings with other nVent CADDY fasteners to support cables from flange, purlin, drop wire, t-grid, etc.
Material: Steel
Finish: Electrogalvanized
Diameter: 1 1/4”
Screw Diameter: 14”
Screw Type: Wood
Screw Length: 3/4”
Ultimate Static Load: 50lb