Shop NAPCO SECURITY TECHNOLOGIES | Brands We Sell

2-point window/door transmitter designed for use in NAPCO GEM-series wireless systems. When used with the supplied magnet, the transmitter functions as a window/door sensor. However, terminals are provided for normally-closed external contacts so that one or two additional devices may be used in conjunction with, or instead of, the internal reed switch.

Expands the capacity of the Gemini control panels by increasing their on-board zones in selectable increments of eight zones. The GEM-EZM8 is supported by the P816, P1632, P3200 and P9600.

Four-zone and 8-zone modules may be combined as necessary to supply the required number of zones.
Refer to the installation instructions for the control panel in use for wiring requirements for UL-listed applications

The GEM-GB is an advanced wireless acoustic glass-break detector for use with all Gemini-Series control panels and receivers. Each transmitter has a unique RF ID code (printed on the sensor module and on the rear case) that distinguishes itself to the receiver. Refer to control-panel instructions for entering this code and its checksum digit into the panel. Be sure to enter all numbers and/or letters, including leading zeros, if any.

advanced PIR sensor designed for use with Napco’s GEM-Series wireless receivers

Universal Dual Path Cellular Commercial Fire Alarm Communicator connected by Verizon 5G LTE-M that supports any brand 12V to 24V Fire Alarm System.

 Universal Cell/IP Communicator & Remote Services Hub, Connected by AT&T 5G LTE-M, for cell & IP alarm reporting, Full native download support & emulated remote keypad, bus data & full notifications.

5G LTE-M Universal Dual Path Commercial Fire Alarm Cellular Communicator

8 to 32 Zone Fire Alarm Control Panel, 8 conventional fire zones, suitable for 2-wire fire, preloaded program ideal for waterflow supervisory, expandable to 32; 2 programmable NAC circuits, 2A max @ 24V

The StarLink Residential Fire and Commercial/Residential Burglary alarm capture communicators are fully supervised, wireless digital two-way subscriber units supported by an extensive nationwide wireless network. The SLE-MAXV operates on the Verizon network, the SLE-MAXA on the AT&T network and both models utilize CAT-M1 technology. All models are compatible with most 12VDC alarm control panels (always adhere to the documentation provided by the control panel manufacturer). All can function as a backup to existing telephone lines, or as sole path primary communicators. In backup mode, all units will automatically switch the communication channel from the telephone line to the network when telephone line trouble is detected. For Commercial installations, mount the unit to a single-, dual-, or three-gang electrical box and route the wires through the back knockout(s), or as specified by local codes.

The Napco StarLink Connect SLE-LTEV-C is a universal dual-path (Cellular Verizon LTE/IP) alarm communicator that is designed for new or existing security systems. Napco’s SLE-LTEV-C is a reliable takeover device, that upgrades legacy security platforms to a modern, mobile experience. Much more than a basic communicator, this intuitive device smartly bridges intrusion security with a full emulated remote keypad, bus data and full notifications. Using the SLE-LTEV-C you can stay connected all the time to your home or business. From any smart device you can keep an eye out on one property or many, get text or video notifications on events, on virtually anything, like temperature alerts, refrigerator door ajar/open, deliveries, scheduled events that did or didn’t happen, alarms, video-verified openings/closings and more. See status and take charge of your smart security system with the SLE-LTEV-C communicator.