Shop NAPCO SECURITY TECHNOLOGIES | Brands We Sell

NAPCO’s Gemini GEM-X255 is a state-of-the-art microcomputer-based burglary and residential fire alarm control panel of modular design. Integrally an 8-zone panel, it will support up to 255 zones with optional zone expansion modules, wireless receiver modules and/or GEM-RP1CAe2/GEM-K1CA Keypads. Each panel includes an integral digital communicator. The control panel features programmable area partitioning. That is, the system may be divided into up to 8 discrete multiple-zone areas, each allowing access by only those users programmed for their respective area(s).

The FWC-FSLC-PULL series are the Napco series of addressable manual pull stations that provide a fast and practical means of manually initiating a fire alarm signal. Both single-action and dual-action manual pull stations are available. Resetting of the pull station requires either a Cat 30 key or a 1/8” hex key (depending upon the model used).

Napco SLE-ANTEXT04 is for use with cellular fire communicators, suitable for outdoor or indoor applications. The StarLink Remote Antenna Kits are designed to increase LTE cellular transmission signal strength by providing a weatherproof exterior antenna option for the StarLink SLE Fire Series UL Listed communicators. The kits include a dual wide band, 4-9dBi omnidirectional indoor / outdoor antenna that provides improved signal performance in weak cellular signal areas. The antenna is foam filled for vibration stabilization and long lasting performance in extreme conditions.

Napco LOCK-8 Lock with 2-Key and Clip

The SLE-ANTEXT dual-band indoor / outdoor antenna provides omnidirectional coverage in cellular frequencies. When the minimum signal strength required by the Napco StarLink radio installation instructions cannot be met, the StarLink SLEANTEXT external antenna may be used to increase the signal strength. The SLE-ANTEXT is intended for use with StarLink SLE Series and Star- Link SLE Fire Series UL Listed communicators. The SLE-ANTEXT is designed to minimize loss and maximize gain (you can likely expect a gain of 3dB). Although we recommend using the SLEANTEXT, any similar cell phone external antenna may be used without violating the UL Listing of the SLE radio (always keep the length of the coax cable as short as possible to minimize signal loss). Always mount the SLE-ANTEXT on a flat metalground plane. The supplied mounting bracket is the minimum size that should be used; use of a larger size is preferred. For outdoor installations, always follow NEC requirements for grounding.

Addressable SLC Heat Detector 135°F

The Fire Signaling Line Circuit Module is the hardwired interface between compatible NAPCO Fire SLC devices and the Gemini C-Series control panels

The Napco Gemini P816 Security System Kit with GEM-RP1CAe2 Keypad includes the P816 security control panel in an enclosure, an alphanumeric keypad, and a step-down transformer. Together, these components provide a solid starter kit for your new Napco Gemini security system.

Dual Path Commercial Burglary Alarm Communicator on Verizoin LTE network

The Napco SLE-WIFI-MODULE is a optional plug-in wifi module designed for Napco SLE dual-path alarm communicators. The SLE-WIFI-MODULE allows your Napco StarLink device to connect to the Internet by means of a wireless (WiFi) link, eliminating a wired Ethernet cable connection.

When installing the SLE-WIFI-MODULE module, please note that it requires 40mA, therefore the existing battery inside the housing may need to be replaced with a larger battery; verify sufficient power is available if the radio is powered by the FACP.