Search Results

Net Link Internet Communications Module
UL Approved for Commercial Applications
Meets UL AA High Line Security
Provides Full Channel Serial Reporting
Up/Download When Connected to NAPCO GEM-P1632, 3200, 9600, 255 and Freedom F-64 Control Panel

UL and NFPA 72 Fire Code-Compliant, the StarLink Series Wireless Commercial Fire Alarm Sole Path & Dual Path Communicators provide universal support for any brand 12V to 24V fire alarm control panel, reporting in Contact ID and 4/2. With broadest LTE coverage footprint, Verizon or AT&T, using proven StarLink circuitry, they are also available in locking metal models. All provide the most economical solution for easy, versatile installation. Also regional compliances, i.e., CSFM, NYCFD, LAFD and more.

iBridge Video WiFi/POE Mini Dome Camera’s Round Junction Box Optional Accessory for ISV2DOME Indoor/Outdoor Dome Camera

Provides an address point for a zone of up to 25
conventional smoke detectors
Blinks green when polled; latched on red (controlled by panel) when activated
Device address can be programmed with a handheld programmer. Device address ranges from 1 to 127
Compatible with Class B and Class A wiring
Auxiliary power source provides power for the zone of detectors
Compatible with conventional detectors

6-conductor satin cable included
For use with Napco Quickloader control panels

45 × 45 feet range
20 lb pet/animal Immunity
Room-temp alert ™ temperature monitoring provides auto-alert at 40F – 90 F
Look-down/creep zone
D.C.I.D. Technology – detect & compare imaging diagnostics for advanced false and true alarm detection
Active self test mode
Exceptional RFI-/EMI/lightning shielding of key components
Lens bank available, including long range, barrier, and specialty ranges
Wall or corner mountable
Tamper supervised
Form A relay

2-zone conventional expansion module
UL 864 9th Edition Listed
Single input contact monitor
Fast, reliable contact monitoring
127 devices can be used per SLC loop
Can be programmed to monitor Normally Open (NO) or Normally Closed (NC) contacts
Operates on Class A or Class B SLC loop

ISEC-WL-SIREN Additional Plug-in Siren w/ StrobeFor more alarm sounding throughout premises, up to 4 optional wireless sirens can be used in addi-tion to the one built-into the Go-Anywhere Hub
Plug into AC or optional battery operation
(wall-mount)
85dB at 10’, UL-Rated
Supports Siren, Temporal Fire and CO alarm audi-ble cadences
Integral bright LED strobe w/ diff. pattern for burg or fire
Operable from 110VAC with battery-backup or Batteries-only
Battery-only operation with 4 standard Alkane
C cell batteries up to 3 years typ.
Supervises battery, and detects and notifies low battery condition
Optional Tamper magnet-activated switch
Indoor or outdoor operation
Supports OTA firmware updates

Napco GEMC-PS24V7A-R Replacement 7A, 24V power supply for GEMC

Provides Isolated 4-Wire Burg Bus for Burg Keypads and Devices, Plus 12 Volt Power Output for Auxiliary Devices
Independent Burg Bell Output
Complete Separation of Fire and Burg Power, Plus Independent Burg
Battery Connection and Charger for Independent Burg
Standby Operation in Power Failure