Search Results

Power limited output to the StarLink communicator PC board 12V input terminals
Battery connection red and black flying leads
Monitored battery charging and Active battery test circuits
StarLink communicator trouble input (from StarLink communicator PC board PGM1 terminal to detect StarLink communicator trouble)
Requires a sealed lead acid min 4AH / max 7AH battery for minimum 24-hour standby time (max charge current 200mA)
Trouble relay output (C, N/O and N/C terminals) to wire to a panel zone dedicated to “CAT-M1 Trouble” (dry contacts). Remove jumper “J2” to isolate common from ground
Green AC ON LED visible from the exterior housing

Napco FWC-CNV-PULL2 Conventional Pull Station, dual action hex wrench reset

433MHz Wireless Transmitter
Long Range up to 820’ open air
1-Way Encryption
Tamper Supervised
Long Battery Life, 10yrs, typ
Includes CR2 3V Lithium Battery
Compact 0.74”Dia., 2.75”Depth (use 3/4” spade drill bit)

Provides an address point for a zone of up to 25
conventional smoke detectors
Blinks green when polled; latched on red (controlled by panel) when activated
Device address can be programmed with a handheld programmer. Device address ranges from 1 to 127
Compatible with Class B and Class A wiring
Auxiliary power source provides power for the zone of detectors
Compatible with conventional detectors

Can be placed at any location on SLC loop
Checks the line for short circuit at power up. If the line is normal, the relay will remain closed; if a line short is detected, the relay remains open
Indication of a single short circuit by a yellow LED
Mounts to standard 4” square electrical box

iBridge Video Fixed Camera w/onboard video storage &12 mos svc In 10 minutes give residential & small business alarm accounts remote video- easy install & upsell
High HD resolution remote video up to 20 frames per second at HD res (1280 × 960) – No Spe cial WAP!
Includes custom dealer website log-in screen and 12-months subscriber internet access
32GB Onboard HD video storage, for up to 7 days, viewable from App or online

Addressable 1pt. output module
Napco addressable commercial burglary
devices permit longest loop length,
up to 10,000’ – no repeater necessary

NAPCO Fire Pull Station: Marked Fire, Smooth, Surface, 4 in Dp (In.), 5 1/2 in Lg (In.)

Unique backlit, combination alphanumeric and symbol display
EZ-Programming mode
New intuitive, stay & away ease-of-use buttons, for easy one button arm and easy
instant key (hold-down) with the GEMK2AS.
Traditional interior and instant keys with the GEMRP2ASe2
Large soft touch backlit keys with tone
Backlit displays for easy reading
Wireless transmitter signal strength indication
Decor friendly soft white design
Fire, police and auxiliary programmable panic keys
Fingertip reference chart

Universal Alarm Communicator; IP and/or Cellular Alarm Dual Reporting
Full Support for Growing List of Major Panels & Brands
Full Virtual Keypad Smart App, Mirrors the Real Keypad on the Wall
Notifications Full Bus-Based SMS/MMS Powered by iBridge
Z-Hub Option adds Z-Wave Device Control for Connected Home/Biz & Scenes