Shop SECO-LARM (USA) INC | Brands We Sell

The Seco-Larm SK-910RBQ is a one channel receiver that can be used to control a garage door opener, house lights, alarm control panel, or other remote devices.

RF reception is indicated by a blinking LED. The receiver can learn to a maximum of 15 transmitters and is simple to connect thanks to its built-in screw terminals. A mode switch on the device can be used for easy transmitter learning.

The SK-919T2-GNQ from Seco-Larm is a 2 button RF transmitter for use with all 315 MHz receivers, pre-coded.

The Seco-Larm SD-969-S18Q is an 18” armored door cord with aluminum end caps.

Seco-Larm SD-995C-D3Q No-Cut Door Strike.12/24 VDC. Fail-safe (door unlocks when power is lost) or fail-secure (door locks when power is lost) operation. UL listed. No horizontal or vertical adjustment possible.

The Seco-Larm SS-076Q/SW snow white toggle switch is a safe and convenient way to disconnect panel power or to remove power from a backup battery installed in your SECO-LARM Enforcer Security Panels. The switch is simple to mount thanks to the 6 (15 cm) pre-wired leads and two mounting holes. The toggle switch is housed in a plastic case and installs inside any security cabinet.

The Seco-Larm E-941DA-1K2P is a double door magnetic lock used for securing a door against unlawful entry. The lock has a holding force of 1200 lbs per door and is equipped with a bond sensor and LED that show the locking status of each door.??When power is run to the electromagnetic lock, it creates a strong magnetic field. Once the electromagnet is deactivated, the secured door will function normally without any residual magnetism. The electromagnet is attracted to the steel armature plate which is mounted directly to the secured door. ??The E-941DA-1K2P is housed in anodized aluminum and has a detachable face plate. Full monitoring is standard and it is recommended for traffic control, interior doors, and airlocks. The quick mount assembly reduces installation time compared to epoxy sealed magnetic locks.

The ENFORCER Outdoor No Touch Request-To-Exit Sensor is a full-featured exit plate which uses IR technology to allow egress from a protected area or activate a device with the simple wave of a hand. Since it is No Touch, this sensor is ideal for use in hospitals, clinics, labs, cleanrooms (to reduce the risk of contamination), schools, factories, or offices.

The SK-1323-SDQ from Seco-Larm is an indoor and outdoor stand-alone keypad designed to control access of a single entry point for facilities with up to 1010 users. Each user is assigned a personal identification number (PIN), which releases an electric door lock or triggers a gate operation. All features are programmed directly from the keypad. There is no need for an external programmer. Each relay has a programmable output time from 1-99 seconds or toggle. Additional features includes a rugged aluminum construction, backlit keys for easy night time use and IP66 weatherproof rating for the harshest conditions.

The Seco-Larm E-941DA-600Q is a double door magnetic lock used for securing a door against unlawful entry. The lock has a holding force of 600 lbs per door. The E-941DA-600Q is housed in anodized aluminum and has a detachable face plate. Full monitoring is standard and it is recommended for traffic control, interior doors, and airlocks. The quick mount assembly reduces installation time compared to epoxy sealed magnetic locks.

The Seco-Larm SL-1312-SA/B is a mini strobe siren with a blue lens. The strobe can mount to a single gang box or be surface mounted.