Shop SECURITY DOOR CONTROLS | Brands We Sell

Automatic low-energy swing door operators are designed for applications requiring ADA compliance or user convenience. SDC’s AUTOS136V operator is built with a state-of-the-art microprocessor- based unit that is self-tuning and self-learning while offering non- handed operation, full-mechanical stops and a variety of interface options for sensors, push-plates, fire alarms and electrified locks.

SDC 1500 series EMLocks® include a lifetime warranty and are available in 650lbs, 1200lbs, and 1650lbs holding force. Compatible with any access control system, all EmLocks® are adaptable to virtually any application utilizing Top Jamb or Glass Door mounting kits. The epoxy- less design provides a superior appearance with a plated or anodized finish on all sides. The interlocking EZ mount assembly leaves hands free for wiring and securing of mounting screws. EMLocks® are UL Listed and ANSI Grade 1 compliant.

The 1511SNAKV Exit Check series incorporates an alternating verbal message, verbal countdown and 80 db tone, plus a large digital countdown display and door release indicator that provides a clear warning or safety for persons without prior knowledge of door operation, including the blind and hearing impaired. Delayed Egress Magnetic lock for use on a varitey of applications.
SDC’s ExitCheck® delayed egress locks continue to be the premier delayed egress offering on the market. The patented design revolutionized delayed egress by incorporating an alternating verbal message, verbal countdown and alarm tone, plus a large digital countdown display and door release indicator to provide a clear warning for the safety of persons without prior knowledge of door operation, including the blind and hearing impaired. Designed to delay egress through perimeter exit doors for 15 or 30 seconds, alert security and personnel to unauthorized egress, and are compatible with access controls and patient w

The SDC 491-BB is a blue surface mount box designed for the 491 emergency break glass station.

SDC’s EH series magnetic door holders are designed to hold doors open and release the door by remote switch or fire life safety command center activation. Primary application includes holding and releasing of fire rated doors that are required to provide a barrier for fire and smoke in an emergency or the convenience of door closure by remote control.
Choice of 25, 30, 35 or 40lbs holding force determined by units specified voltage. Reduced power supply requirements and energy costs due to low power consumption (15mA to 40mA). Field selectable high holding force comes standard, reducing stock
or need to special order high holding force. Screw terminal block input connections for simple and neat wiring. Innovative installation eliminates the need for secondary alignment adjustments. Ball pivot assembly enables full plate contact and holding force. Optional adjustable rod compensate for extreme misalignment
up to four inches. Slotted mounting holes enable adjustment of magnet centerline.

Extra heavy-duty mortise bolt locks are designed to fit inside 1-3/4 frames. The 3/4” diameter solid stainless steel bolt is powered by an extra heavy duty solenoid for superior bolt thrust.??SDC Spacesaver Heavy Duty Electric Bolt Lock, Narrow Mortise, Failsafe, 630 Stainless Steel Finish, for 1-3/4” Frame.

SDC 1500 series EMLocks® include a lifetime warranty and are available in 650lbs, 1200lbs, and 1650lbs holding force. Compatible with any access control system, all EmLocks® are adaptable to virtually any application utilizing Top Jamb or Glass Door mounting kits. The epoxy- less design provides a superior appearance with a plated or anodized finish on all sides. The interlocking EZ mount assembly leaves hands free for wiring and securing of mounting screws. EMLocks® are UL Listed and ANSI Grade 1 compliant.

SDC’s S6000-101 series all-in-one devices integrates the S6000 series exit device with SDC’s innovative delayed egress electronics. When unauthorized egress is initiated by depressing the push pad of the S6000-101, an audible alarm will sound and an irreversible delay period of 15 seconds will begin. After the delay period has expired, the device unlocks, permitting egress until the device is reset. In a life safety emergency, the device will immediately unlock upon loss control supervised power supply.

SDC’s WRC series two channel wireless 433MHz transmitter/ receiver solution is specifically designed to be used as a receptionist button or remote release for single or dual door access control applications. The receiver has the capacity to learn up to 30 fixed transmitter codes using the onboard learning button and status LED.
Transmitter Features
Operates with WRC-R2 or WRC-R2-12
Pendent keychain type housing