Shop Locking Devices

Bracket mounted, single magnetic lock with 600 lbs holding force that can be easily installed without special tools and used with any access control system. Ideal for high-use areas for traffic control in interior applications. Available with LED, bond sensor and door status signaling options.

The RCI L65U is a member of the 6 series that RCI manufactures and the low profile version of the RCI 65U. The 6 Series is their “All-in-One” family in door strikes. This low profile, heavy duty, electric door strike has up-to 1500 Lb-ft of static strength. It features a field selectable Fail-Safe and Fail-Secure mode to activate in the event of power loss. It also features a field selectable voltage range of 12/24VDC or 12-24VAC. The 6 Series has been factory tested to over 1 million cycles of operation. The 65U is ideal when a 3/4”, 5/8”, and 1/2” latch projection is required.

HES 1006CS 630 Fail Secure, Complete 12/24VDC Electric Strike, SMART Pac II, J, KD, KM, HM and AD Faceplates, Satin Stainless Steel The 1006 series is the strongest and most versatile electric strike available. The dual interlocking plunger design and heavy duty stainless steel construction, enables it to exceed every standard developed for electric strikes. With multiple faceplate options, the 1006 will fully accommodate every lock designed to work within an ANSI 4-7/8” strike plate. Tested to exceed 3,000 lbs. of static strength, 350 ft-lbs. of dynamic strength and factory tested to exceed 1,000,000 cycles of operation, the 1006 is in a class of its own.

The SECO-LARM Surface-Mount Electric Rim Strikes are designed with the strength and durability for use with rim-type exit devices with a Pullman latch bolt (3/4” throw for the SD-998C-D3Q, 1/2” throw for the SD-998C-D3AQ). The strikes feature 12/24 VDC operating voltage, selectable fail-safe/fail-secure operation, horizontal adjustment, and a surface-mount metal housing, eliminating the need for frame cutting during installation.

Alarm Controls Corporation’s 600 pound Double Magnetic Lock, model 600D. The 600D provides a minimum of 600 pounds holding force for each lock and utilizes the ACC E-Z mount system for easy installation. The 600D is 12 or 24 VDC, jumper selectable and can be used with any access control system. E-Z mount system, No special tools required

The Alarm Controls AM3300 is a 1/2” spacer plate designed for the 600 series magnetic lock. The unit lowers the magentic lock by 1/2” and has a clear anodized aluminum finish.

The 1006CLB accommodates every cylindrical and mortise lockset for ANSI 4-7/8” strike plates with up to a 3/4” latchbolt. Included in the box is a 1006 strike body, 3 faceplates (J, KD and KM) plus all the necessary mounting hardware you will need. The dual interlocking plunger design and heavy duty stainless steel construction of the 1006 series, enables it to exceed every standard developed for electric strikes.Tested to exceed 3,000 lbs. of static strength, 350 ft-lbs. of dynamic strength and factory tested to exceed 1,000,000 cycles of operation, the 1006 is in a class of its own.

The Seco-Larm SD-995C Electric Door Strikes for Metal Doors from SECO-LARM converts cylindrical lock sets to an electronic access controlled locking system, which can be controlled through a keypad. The unit can be programmed for fail-secure operation (when power is lost or cut, the door is locked) or fail-safe operation (when power is lost or cut, the door is unlocked). This stainless steel device installs quickly in any metal door and can convert virtually any existing cylindrical lockset to an electronic access controlled locking system that allows for remote visitor entry. Just connect two wires to the access control E-931-S35RRQ or egress device, such as a digital keypad, push-button switch, or other device. The device is reversible for right or left-hand doors. The electric door strikes heavy-gauge construction withstands 2000 pounds (1 ton) of force.

Recommended for exterior and perimeter doors through which criminals could gain entrance to cause substantial economic loss. 1200 lbs holding force MagnaLock with automatic dual voltage.