Shop Locking Devices

Magnetic gate lock with 1200 lbs of holding force provides weather resistant access control for perimeter applications. Ideal for sliding or swinging gates.

Electromechanical gate solution with one ton of holding power for swinging and sliding gates

The Securitron CWB-32CL is a 1/2” thick clear anodized aluminum concrete wood header bracket for the M32 MagnaLocks which is designed to improve frame mounting strength, MagnaLock/Strike clearances, alignments and ease of the installation.

The Alarm Controls AM3332 is a 1/2” spacer for 600-pound double magnetic locks. Spacers lower magnetic locks. It’s transparent anodized metal.

The Seco-Larm E-941DA-600Q is a double door magnetic lock used for securing a door against unlawful entry. The lock has a holding force of 600 lbs per door. The E-941DA-600Q is housed in anodized aluminum and has a detachable face plate. Full monitoring is standard and it is recommended for traffic control, interior doors, and airlocks. The quick mount assembly reduces installation time compared to epoxy sealed magnetic locks.

The 9600 Series is a windstorm rated, surface mounted electric strike that was designed to accommodate rim exit devices that have a 3/4” throw latchbolt. All of the components are completely secure encased inside the thick stainless steel housing – no cutting of the frame is required for most installation. All you have to do is place the electric strike on the surface of the frame, align it with your exit latchbolt and install the screws. From the field you can select fail safe or fail secure; you can also field set voltage at 12V or 24VDC. The 9600 is the only surface mounted electric strike we know of that is designed with the strength and durability required to exceed the severe forces of ANSI Windstorm testing.

The 6 series centerline strikes are available in standard profile or low-profile options to accommodate different latch projections. This heavy-duty series combines several requested key features. Standard features include a multi-voltage single solenoid, selectable lock mode (no tools necessary), horizontal adjustment, and plug-in wire connectors. ¼” horizontal adjustment makes installations faster and easier. Plus, with the RCI 6 series there will be less pressure on installer’s strike inventory, because these RCI strikes do it all.

The Securitron M62G is a MagnaLock with 1200 lbs of holding force which is a strong, easy-to-maintain solution for interior, perimeter and exterior access Control and comes equipped with a gate conduit suitable for use on outdoor gates. The M62G is recommended for exterior and perimeter doors.

The HES 9600-630-LBM is a windstorm rated, surface mounted electric strike designed to accommodate rim exit devices with a 3/4” throw latchbolt. All components are completely encased within its 3/4” thick stainless steel housing, so no cutting on the frame is required for installation. Simply place the electric strike on the surface of the frame, align it with the exit latchbolt and install. It is field selectable for fail secure and fail safe operation, and for 12 or 24VDC.

The 9600 series is the only surface mounted electric strike designed with the strength and durability required to exceed the severe forces of ANSI Windstorm testing. The unit features a satin stainless steel finish and comes equipped with a latchbolt monitor.

The Securitron CWB-62CL Series of concrete wood bracket is specifically designed to be used on wood or concrete filled metal frames. This unit provides a concealed wire chamber and it is also quite easier than blind nuts in some cases. These concrete wood brackets are used with M62 series of magnaLocks.