Search in Category
Filter Your Search
Brand
Shop by Category
Shop Intrusion Accessories
DSC ADDRESSABLE MX CEILING MOUNT 25/CTN
360° motion detection from a ceiling-mounted device
Coverage of up to 10m (32.8ft) in diameter; ideal for small-to medium-sized rooms
Modern, unobtrusive design
SERIAL PORT EXPANDER & THERMOSTAT/LIGHTING
The ELK-M1XSP is a “3 in 1” product for additional serial ports and for integration with lighting systems and thermostats. Jumpers on the M1XSP select the appropriate application, connection, and protocol. Best of all, the M1XSP operates from the 4-wire (RS-485) M1 Keypad data bus, allowing RS-232 ports to be located long distances from the control. The M1 Gold and M1EZ8 support up to 7 M1XSPs. The communications baud rate is adjustable from 300 to 38,400 baud. The unit comes complete with cable and a black surface mountable housing.
QC000E-840 - Qolsys Zigbee Daughter Card (for IQ Panel 4)
Daughter card that allows Zigbee (2.4GHz) device support on IQ Panel 2,4 and IQ4 Hub
DSC ADDRESSABLE MX ISOLATOR 35/CTN
Short circuit detection insulating the affected section
Designed to be mounted in a standard dual-gang MK box
Yellow LED to provide indication of unit operation
MULTIPURPOSE ADAPTER PLT 4" W/PLASTIC ST
Convenient multi-purpose adapter plate accommodates many M1 expanders and peripherals. This versatile adapter also provide mounting for a variety of ELK components including relays, siren drivers, power supplies and more! For use with ELK structured wiring enclosures.
M & G ELECTRONIC SALES CORP BUS TERMINAL STRIP 1IN 6 OUT
One example of the usefulness of this bus terminal expander is to de-clutter your power terminals. Run the negative to one side of the terminal expander and the positive to the other side and then all your power wires, for example your keypads, into the other terminals on the expander. Add another DT-600 for the data wires of your keypads and you clean up the terminals on the main board.
Qolsys IQP4STAND-BLK IQ Panel 4 Table Stand
Table stand for IQ Panel 4 & IQ4 Hub (Black)
MAIN SERIAL INTERFACE PORT FOR EZ8
The ELK-M1EZ8MSI Main Serial Port Interface allows direct RS-232 Serial Communications to an M1EZ8 Control for Upload/Download programming, and for interfacing with other Computer type devices. Also required when adding the M1XEP Ethernet Port to an M1EZ8 Control. The speed of this port is software selectable from 300 to 115,200 baud.
ZONE TEMP INTERFACE & SENSOR -50 TO 140F
Monitor high or low temperatures with this add-on remote sensor. Connects to any main zone on the M1 Gold (1-16) or M1EZ8 (1-8). Range is -50 to +140F. Applications include: freeze monitoring, second homes, agricultural uses, etc. Temperature may be accessed from keypad, telephone remote control, or rules.
CABLE TO CONNECT EXTERNAL PROX TO M1KP2
This two pin cable is used to connect a 26 bit Wiegand reader (such as the ELK-106055) to the ELK-M1KP2 or M1KP3 Keypad.
