Browse Categories

Search in Category

Detection Devices

Shop by Category

Loading...

Shop Detection Devices

ADDRESSABLE ANALOG SLC PHOTOELECTRIC SMK

ADDRESSABLE ANALOG SLC PHOTOELECTRIC SMK


Supplier Part #: FWC-FSLC-SMK

Addressable SLC Photoelectric Smoke Detector

IN STOCK
POTTER SUPERVISORY SWITCH

POTTER SUPERVISORY SWITCH

Item #: POT-OSYSU-2

Supplier Part #: OSYSU-2

The OSYSU is used to monitor the open position of an OS&Y (outside screw and yoke) type gate valve. This device is available in two models; the OSYSU-1, containing one set of SPDT (Form C) contacts and the OSYSU-2, containing two sets of SPDT (Form C) contacts. These switches mount conveniently to most OS&Y valves ranging in size from 2” to 12” (50mm to 300mm). They will mount on some valves as small as “ (12,5mm). The cover is held in place by two tamper resistant screws that require a special tool to remove. The tool is furnished with each device and should be left with the building owner or responsible party. Replacement or additional cover screws and hex keys are available.

IN STOCK
LOW PROFILE WIRELESS WINDOW/DOOR TRANSMI

LOW PROFILE WIRELESS WINDOW/DOOR TRANSMI


Supplier Part #: GEM-TRANSLP-BRN

Gemini Series Wireless Low Profile Window/Door Transmitter, Brown

IN STOCK
CONTROL VALVE SUPERVISORY SW.

CONTROL VALVE SUPERVISORY SW.

Item #: POT-PCVS-2

Supplier Part #: PCVS-2

The Model PCVS is a weather proof and tamper resistant switch for monitoring the open position of fire sprinkler control valves of the wall and yard post indicator and butterfly types. Two SPDT (Form C) contacts are provided which will operate when the valve position is altered from an open state. The unit mounts in a 1/2” NPT tapped hole in the post indicator or butterfly valve housing. The device is engaged by the indicating assembly of the post indicator or the operating mechanism of the butterfly valve, actuating switches when the valve is fully open. The unit should be installed where it is accessible for service. The cover is held in place by two tamper resistant screws that require a special tool to remove. The tool is furnished with each device.

IN STOCK
CARBON MONOXIDE CO DETECTOR F/USE W/FIRE

MACURCO INC. CARBON MONOXIDE CO DETECTOR F/USE W/FIRE

Item #: MAC-CM-E1

Supplier Part #: CM-E1

The Macurco CM-E1 is a reliable, lightweight, and aesthetically pleasing gas detector made to keep you and the people you care about safe from harmful gases in residential and light commercial applications. It is a low-voltage gas detector designed for use with fire and security systems. The CM-E1 is UL 2075 Listed for use in residential and commercial applications and is also approved by the California State Fire Marshal.

IN STOCK
POTTER SUPERVISORY SWITCH

POTTER SUPERVISORY SWITCH

Item #: POT-OSYSU1

Supplier Part #: OSYSU-1

The OSYSU is used to monitor the open position of an OS&Y (outside screw and yoke) type gate valve. This device is available in two models; the OSYSU-1, containing one set of SPDT (Form C) contacts and the OSYSU-2, containing two sets of SPDT (Form C) contacts. These switches mount conveniently to most OS&Y valves ranging in size from 2” to 12” (50mm to 300mm). They will mount on some valves as small as ½” (12,5mm). The cover is held in place by two tamper resistant screws that require a special tool to remove. The tool is furnished with each device.

IN STOCK
DUAL ACTION STATION RED TERMINAL BLOCK K

Fire-Lite BG-12 Series Fire Alarm Pull Station

Item #: FLT-BG-12LOB

Supplier Part #: BG-12LOB

BG-12 Series fire alarm pull stations are designed to meet multiple applications with the installer and end user in mind. They feature a variety of models including single- and dual-action versions.

IN STOCK
PHOTOELECTR 4WIRE DETECTOR & HEAT W/BASE

System Sensor i³™ Series Smoke Detectors with Sounder, Relay and Isolator Options

Item #: SYS-4WTR-B

Supplier Part #: 4WTR-B

i³™ Series offers conventional smoke detectors with sounder, relay and isolator features included.

IN STOCK
CO REPLACEMENT CELL F/I4 SERIES DETECTOR

System Sensor i4 Series CO/Smoke Detector Replacement CO Sensor

Item #: SYS-CO-REPL

Supplier Part #: CO-REPL

Replacement carbon monoxide (CO) sensors for the i4 Series COSMO-2W 2-wire and COSMO-4W 4-wire combination CO and photoelectric smoke detectors

IN STOCK

System Sensor i³™ Series Smoke Detectors with Sounder, Relay and Isolator Options

Item #: SYS-2WTR-B

Supplier Part #: 2WTR-B

i³™ Series offers conventional smoke detectors with sounder, relay and isolator features included.

IN STOCK
  • « PREV
  • 1
  • 2
  • 3
  • 4
  • 5
  • NEXT »