Shop Power Supply

12VDC, 2 AMP,
Screw Terminal
• Switching Power Supply?• Fully Regulated?• Screw Terminal

This a reputable 1 amp plug in transformer to power keypads, cards, or fingerprint access controllers, readers, and electric locks. The model offered here is 24 Volt DC. Be sure the electric strike, keypad, or maglock accepts this voltage. With DC current, when the electric strike or maglock ‘fires’, the ‘buzz’ sound is nearly non-existent, typically no more than a light click is heard. AC current creates a louder buzz sound and is most commonly used in situations to indicate to the person at the door it’s ok to push or pull on the door to open. For smaller, 1 or 2 door systems, and especially when using electric strikes, we recommend DC current. DC current over time preserves the shelf life of an electric strike.

Features:
Sideways plug for ease of use on power strips
Universal 100~240VAC input
Regulated 12VDC output
6-Foot cord with 2.1mm plug (positive center)
Low power consumption
Specifications:
Compatibility: ENFORCER CCTV Network Camera Series
Environmental Certification: RoHS
Output Voltage: 12 V DC
Environmentally Friendly: Yes
Maximum Output Current: 2 A
Input Voltage: 110 V AC, 220 V AC
Device Supported: Surveillance/Network Camera
Product Type: AC Adapter

With an auto-resetting poly fuse, service calls are no longer necessary after a short circuit. A ground prong is included for input protection and panel ground connection. The power supply is surge protected against AC line spikes and transients that could potentially damage the unit or other connected devices.

The 24 VDC 2A Power Supply with Screw Terminal Output from MG Electronics provides power for devices requiring 24 VDC, 2A voltage. It features two screw terminals.

Designed for 12VDC operation in CCTV and alarm applications, this UL and CSA listed AC to DC switching power supply features screw terminal connections, precision power regulation, LED supervision, and short circuit/over voltage protection.

Features:
Sideways plug for ease of use on power strips
Universal 100~240VAC input
Regulated 12VDC output
6-Foot cord with 2.1mm plug (positive center)
Low power consumption
Specifications:
Environmentally Friendly: Yes
Product Type: AC Adapter
Packaged Quantity: 1
Environmental Certification: RoHS
Input Voltage: 120 V AC, 230 V AC
Output Voltage: 12 V DC
Device Supported: Access Control System, CCTV, Security Device

Encapsulated multi-voltage relay suited to applications requiring remote relay for control or status feedback.
• Long flying leads selectable for input control voltage to be applied.
• Applications include Fire Alarm Control, security systems, HVAC, temperature control, lighting systems and energy management.

Plug-in power supply, EISA compliant, auto-resetting poly fuse, 120 VAC input, 24 VDC output @ 1000 mA (1 amp) maximum.