Shop Home Automation Accessories

The alarm.com ADC-W115C Smart Chime and WiFi Access Point is designed for use with the ADC-VDB780B battery-powered wireless video doorbell camera. Designed to work seamlessly with the alarm.com platform, the ADC-W115C serves as a robust Wi-Fi extender and customizable wireless doorbell chime. Add the alarm.com Smart Chime to an account when an in-home chime is not a feasible option during a doorbell camera installation. Simply plug the ADC-W115C into a wall outlet, pair with the existing router, add a doorbell camera, and enjoy boosted network signals that provide instantaneous chime notifications.

The alarm.com ADC-VDBA-750-BPA is a wedge-mount installation kit designed for the alarm.com ADC-VDB750 video doorbell camera.

The alarm.com ADC-W110 makes it easy to install any alarm.com Power over Ethernet (PoE) camera by eliminating the need to run cable wiring throughout a home or business. The ADC-W110 simply plugs into any wall outlet and provides a PoE camera with both electrical power and secure/reliable WiFi connectivity.

Please take note that there are two options for connecting the ADC-W110 to the wireless network: Wi-Fi Protected Setup (WPS) Mode or Access Point (AP) Mode. The ADC-W110 integrates with alarm.com, providing easy post-installation GeoArm troubleshooting and enhanced security.

The ZW189-A01 from alarm.com is the Range Extender 7. Empowered by Aeotic’s exclusive Gen7 technology. Range Extender 7 is compatible with all generations of Z-Wave technology. With its universal compatibility, Range Extender 7 is able to repeat and amplify Z-Wave signals from Z-Wave devices as old as those using 100 series antennas and S0 security to newer devices which use either 500 or 700 series and S2 security.

The Jasco 28172 is a Z-Wave Plus plug-in smart appliance outlet switch that can remotely turn ON/OFF the connected device. The Jasco 28172 outlet has advanced features that allow you to customize your experience. These features can only be adjusted by a Z-Wave enabled controller that supports the Z-Wave configuration command class.

The alarm.com ADC-SG130 is tabletop smart gateway designed for alarm.com video surveillance products. With the ADCSG130 gateway in place, you can change internet service providers, or change WiFi credentials which cause the cameras to lose connectivity (and thus cannot be accessed) using the GeoArm alarm.com portal. With this device (ADC-SG130), we create a dedicated network just for the cameras. If the customer makes changes to their WiFi settings, no need to send a truck, since this is plugged into their existing router so the cameras will keep working. If the customer changes their internet service provider, they need only re-plug this device into their new router.

With a reliable wireless connection and excellent range, the ADC-SG130 makes it easy to install any alarm.com Wi-Fi camera. The ADC-SG130 features WPS, eliminating the need to update cameras with complicated router passwords. Simply plug the ADC-SG130 into any wall outlet, connect to the existing router, pair with a WiFi

The alarm.com ADC-VACC-MNT110 is a mounting plate designed for the alarm.com Pro Series security cameras. With the ADC-VACC-MNT110 mount plate installed at your home or business, you can confidently monitor the field of view that your alarm.com ProSeries security cameras see.

The Alarm.com ADC-VACC-MNT110 is a mounting plate used to adapt the ADC-VC827P, the ADC-VC728PF, and the V724 Pro Series Cameras to a third-party mounting base. This adapter is compatible with a variety of third-party bases, and its use can minimize installation time and cost.

The alarm.com ADC-VDBA-780BAT is a battery pack used to replace the existing ADC-VDBA-780BAT video doorbell camera batteries.

The alarm.com ADC-VDBA-PSU-DC is a DC plug-in power supply module designed for the alarm.com ADC-VDB770 video doorbell cameras. The ADC-VDBA-PSU-DC power supply module is rated 16V, 1.25A (20W) and easily powers the ADC-VDB770 doorbell when not using an existing chime circuit. Install the ADC-VDBA-PSU-DC when there is no existing wiring or when the existing setup is incompatible.