Altronix SMP7PMCTX Power Supply Charger, Single Output, 12/24VDC @ 6A, 115VAC, Supervision, BC300 Enclosure
Product Info
12VDC OR 24VDC @ 6 AMP 115VAC INPUT AC AND BATTERY MONITORING GREY ENCLOSURE 13“H X 13.5“W X 3.25“D.
SMP7PMCTX supervised power supply/charger converts a 115VAC / 60Hz input into a regulated 12VDC or 24VDC output @ 6A continuous supply current.
Input
Input 115VAC, 60Hz, 2.5A.
Output
12VDC or 24VDC selectable output.
6A supply current.
Filtered and electronically regulated outputs.
Short circuit and thermal overload protection.
Battery Charging
Built-in charger for sealed lead acid or gel type batteries.
Maximum charge current 0.7A.
Zero voltage drop when switching over to battery backup.
(Batteries are sold separately).
Features
Power ON/OFF switch.
Supervision
AC fail supervision (form “C” contacts).
Low battery supervision (form “C” contacts).
Visual Indicators
AC input and DC output LED indicators.
Temperature
Operating: 0° C to 49° C (32° F to 120° F).
Storage: – 20° C to 70° C ( – 4° F to 158° F).
Relative Humidity: 85% +/- 5%.
BTU/Hr. (approx.):
12VDC: 37 BTU/Hr.
24VDC: 74 BTU/Hr.
System AC input VA requirement: 287.5VA.
Enclosure:
Wall mount enclosure for indoor use.
Accommodates up to two (2) 12VDC/7AH Batteries.
Dimensions 13“W x 13.5“H x 3.25“D (330 mm W x 343 mm H x 83 mm D).
1/2” and 3/4” combination knockouts.
Weights (approximate):
Product Weight: 8.3 Lbs. (3.76 kg).
Shipping Weight: 9.3 Lbs. (4.22 kg).