Browse Categories

Search in Brand

ALTRONIX CORPORATION

Shop by Category

Loading...

Shop ALTRONIX CORPORATION | Brands We Sell

Searching for: altronix-corporation
Viewing Page 6 of 19 (183 results)

ALTRONIX CORPORATION POWER DIST MODULE 8 FUSED OUT

Item #: AL-PD8

Supplier Part #: PD8

Altronix PD8 power distribution module is designed to convert a single AC or DC input into eight (8) individually fuse protected outputs.

IN STOCK

UL POWER DIST MODULE 8 FUSED OUT

Item #: AL-PD8UL

Supplier Part #: PD8UL

Altronix PD8UL UL Listed Sub-Assembly power distribution module is designed to convert a single AC or DC input into eight (8) individually fuse protected outputs.

IN STOCK

ALTRONIX CORPORATION LOGIC BOARD

Item #: AL-AL800LGK9E

Supplier Part #: AL800LGK9E

The AL800LGK9E Logic Board is a replacement board for use in the AL802-WAL NAC and AL1002WAL Power Extender enclosures.

IN STOCK
ACCESS CONTROLELR 8 OUT FACP

ACCESS CONTROLELR 8 OUT FACP

Item #: AL-ACM8CB

Supplier Part #: ACM8CB

Altronix ACM8CB converts one (1) 12 to 24 volt AC or DC input into eight (8) independently controlled Class 2 rated PTC protected power-limited auto-resettable outputs rated at 2.5A each. Outputs are activated by an open collector sink or normally open (NO) dry trigger input from an Access Control System, Card Reader, Keypad, Push Button, PIR, etc. ACM8CB will route power to a variety of access control hardware devices including Mag Locks, Electric Strikes, Magnetic Door Holders, etc. Outputs will operate in both Fail-Safe and/or Fail-Secure modes.
This unit is designed to be powered by one common power source which will provide power for both the board operation and locking devices, or two (2) totally independent power sources, one (1) providing power for board operation and the other for lock / accessory power. The FACP Interface enables Emergency Egress, Alarm Monitoring, or may be used to trigger other auxiliary devices. The fire alarm disconnect feature is individually selectable

IN STOCK
ACCESS PS 4 FUSED OUT W/FACP INTERFAC UL

ACCESS PS 4 FUSED OUT W/FACP INTERFAC UL

Item #: AL-ACM4

Supplier Part #: ACM4

Altronix ACM4 converts one (1) 12 to 24 VAC or VDC input into four (4) independently controlled fuse protected outputs. These power outputs can be converted to dry form “C” contacts. Outputs are activated by an open collector sink or normally open (NO) dry trigger input from an Access Control System, Card Reader, Keypad, Push Button, PIR, etc. ACM4 will route power to a variety of access control hardware devices including Mag Locks, Electric Strikes, Magnetic Door Holders, etc. Outputs will operate in both Fail-Safe and/or Fail-Secure modes.
Units are designed to be powered by one common power source which will provide power for both the board operation and locking devices, or two (2) totally independent power sources, one (1) providing power for board operation and the other for lock / accessory power. The FACP Interface enables Emergency Egress, Alarm Monitoring, or may be used to trigger other auxiliary devices. The fire alarm disconnect feature is individually selectable for any o

IN STOCK
UL PS 12VDC 10A AC/BATT SUP W/ENCL

UL PS 12VDC 10A AC/BATT SUP W/ENCL

Item #: AL-AL1012ULX

Supplier Part #: AL1012ULX

AL1012ULX is a power supply/charger that converts a 115VAC, 60Hz input into a single 12VDC non-power limited output.

IN STOCK
UL 12/24VDC 6A AC/BAT SUP 8OUT W/ENCL

UL 12/24VDC 6A AC/BAT SUP 8OUT W/ENCL

Item #: AL-AL600ULPD8

Supplier Part #: AL600ULPD8

AL600ULPD8 is a multi-output power supply/charger that converts a 115VAC, 60Hz input into eight (8) 12VDC or 24VDC non power-limited outputs.

IN STOCK
UL 12/24VDC 6A AC/BAT SUP 8OUT W/ENCL

UL 12/24VDC 6A AC/BAT SUP 8OUT W/ENCL

Item #: AL-AL600ULPD8CB

Supplier Part #: AL600ULPD8CB

AL600ULPD8CB is a multi-output power supply/charger that converts a 115VAC, 60Hz input into eight (8) 12VDC or 24VDC Class 2 Rated power-limited outputs.

IN STOCK

ALTRONIX CORPORATION UL 12VDC@10A 8OUT AC/BATT SUP W/ENCL


Supplier Part #: AL1012ULACMCB

Altronix AL1012ULACMCB converts a 115VAC 60Hz input into eight (8) independently controlled 12VDC Fail-Safe and/or Fail-Secure outputs with a total of 10A continuous supply current. Outputs are activated by an open collector sink or normally open (NO) dry trigger input from an Access Control System, Card Reader, Keypad, Push Button, PIR, etc. This unit will route power to a variety of access control hardware devices including Mag Locks, Electric Strikes, Magnetic Door Holders, etc. The outputs will operate in both Fail-Safe and/or FailSecure modes. This unit is designed to be powered by one common power source (factory installed) which will provide power for both the board operation and locking devices, or two (2) totally independent power sources, one (1) providing power for board operation and the other for lock / accessory power. The FACP Interface enables Emergency Egress, Alarm Monitoring, or may be used to trigger other auxiliary devices. The fire alarm disconnect feature is indi

IN STOCK

ALTRONIX CORPORATION SMP5 6/12/24VDC 4A WITH ENCLOSURE

Item #: AL-SMP5E

Supplier Part #: SMP5E

Altronix SMP5E power supply/charger converts a low voltage AC input into a 6VDC, 12VDC or 24VDC output. This unit has a wide range of applications for access control, security and CCTV system accessories that require additional power.

IN STOCK
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • NEXT »

The following web pages were found that match your search