Shop ELK PRODUCTS, INC | Brands We Sell

This two pin cable is used to connect a 26 bit Wiegand reader (such as the ELK-106055) to the ELK-M1KP2 or M1KP3 Keypad.

The ELK-6023 Wireless Recessed Door Sensor is the ultimate wireless security device for discriminating customers. It mounts into a 3/4” drilled hole in a wooden door jamb and becomes nearly invisible once the door is closed. It features Elk’s Industry Leading Two-Way Technology with positive signal acknowledgment, extended range, and long battery life. It works with Wireless Transceivers and Controls that accept Elk’s two-way technology; such as, the ELK-M1XRFTWM. Each time the 6023 transmits it sends a unique TXID identifier and a Loop number.

The C1M1 LTEA ElkCommBd is a dual path alarm communications device for use with the ELK-M1G Control family. It is the ideal solution for backing up or replacing old fashioned phone line communications. C1M1 is configured to send full data messages using Internet (IP) as the primary pathway and Cellular as backup. It may also be configured for single path operation in situations where one of the paths (IP or Cellular) is not available. In the dual path configuration it can be optionally programmed to detect temporary outage of either pathway after a selectable time delay and report that outage over the remaining pathway.

The ELK-M120 is a white, self-contained, dual-tone siren designed for indoor and outdoor use. The small size of the ELK-M120 self-contained exterior siren makes it perfect for tight spaces. Regardless of its size, it rivals the sound output of larger units and features a low current draw. This 12 VDC siren generates a sound level of 110 dB at 1 meter. Featuring Yelp or Steady Siren tones, the ELK-M120 is pre-wired for easy installation. Backed by a lifetime limited warranty.

The ELK-M1GKS is a “ready to install” M1Gold kit that includes all the necessary devices required to create a complete security system. The M1 Gold Security and Automation Control System combines security, energy management, and integrated control solutions to provide comfort, convenience and simplicity.

The ELK-912B is a heavy duty relay module featuring 12 or 24V DC selectable operation, SPDT Form “C” contacts, low current draw, voltage input LED, and high quality large cross-head terminals. It is ideal for general purpose switching of devices or high current loads. Also available in a 6 pack (ELK-912B6) which is packaged as multiple relay modules grouped on a pre-scored break-off circuit board.

The ELK-319PB1 is a wireless heavy duty single button panic device that that transmits to an alarm panel when pressed. It can be used police, medical, etc. alarm activation. This sensor is compatible with Elk’s 319MHz Receivers/Panels as well as many other panels that operate on the 319.5MHz frequency.

The ELK-M1EZ8MSI Main Serial Port Interface allows direct RS-232 Serial Communications to an M1EZ8 Control for Upload/Download programming, and for interfacing with other Computer type devices. Also required when adding the M1XEP Ethernet Port to an M1EZ8 Control. The speed of this port is software selectable from 300 to 115,200 baud.

A weather resistant, indoor/outdoor strobe light. Adds visual indication for alarms, warnings, hearing impaired applications, etc. Attaches easily to ELK’s stainless steel enclosed units (ELK-1RT & ELK-150RT) or to wall using ELK-WK1. Features simple 12 VDC two wire hookup and compatibility with most control panels. The ELK-SL1 is molded from virtually indestructible polycarbonate.

Monitor high or low temperatures with this add-on remote sensor. Connects to any main zone on the M1 Gold (1-16) or M1EZ8 (1-8). Range is -50 to +140F. Applications include: freeze monitoring, second homes, agricultural uses, etc. Temperature may be accessed from keypad, telephone remote control, or rules.