Shop ELK PRODUCTS, INC | Brands We Sell

Trusted, professional grade step down transformer for low voltage systems, such as Access Control, Security & CCTV.

Self-Contained Siren
Two Tones, Yelp & Steady

The ELK-900-2 “Yellow Jackets” premium quality “B” connectors are manufactured from the finest materials. They feature insulation piercing internal teeth, soft brass (easy to squeeze) crimp, a durable protective outer covering. These wire splices have been used in the telecommunications industry for many years. They provide a solid dependable splice in wires ranging from 22 to 26 gauge. The ELK-900-2 package contains 2 zip lock bags of 250 connectors together with a reusable poly storage box.
Also available is the ELK-9022 which contains a corrosion resistant silicone gel filling

The ELK-999 contains 130 pieces of double faced 1/4” thick closed cell foam tape with an aggressive pressure sensitive permanent adhesive on both sides. This tape can be used in place of mechanical fasteners to mount relays, siren drivers, and many other devices to various surfaces. It is flexible and conforms to irregular surfaces.

The ELK-110 Voice “Talking” Driver features high quality digitally pre-recorded voice messages and loud attention getting siren sounds in an economical, low current draw, compact package. It features three input channels (1 for Burglar, 1 for Fire, and 1 for Carbon Monoxide), bilingual voices (English and Spanish), and many unique options which allow it to be used with virtually any residential or commercial alarm installation. The voice messages and the siren alternately sound whenever one of the channels are activated.

The ELK-M1XEP is an Ethernet Appliance with a RS-232 Serial Port Interface. It may be used to connect a control in the M1 Family to an Ethernet network. It features email event notification and FIPS compliant encryption algorithms for security sensitive environments. It is powered by an ELK-P1216 12 Volts DC, 1.5 Amp plug-in power supply/adapter. A software setup utility is built into ElkRP for configuring the connection setup, network password, etc. The M1 Ethernet Interface is factory defaulted to obtain a dynamic IP address from a DHCP server (i.e. router, cable modem, etc.). It may optionally be setup with a static IP address.

The ELK-902-2 premium quality “B” connectors are manufactured from the finest materials. They feature insulation piercing internal teeth, soft brass (easy to squeeze) crimp, a durable protective outer covering, and contains a corrosion resistant silicone gel filling. These wire splices have been used in the telecommunications industry for many years. They provide a solid dependable splice in wires ranging from 22 to 26 gauge. The ELK-902-2 package contains 2 zip lock bags of 250 connectors together with a reusable poly storage box.
Also available is the ELK-9002 which are unfilled “B” connectors.

Adds 16 hardwired zones (EOL resistor supervised) to the M1 Gold or M1EZ8 Controls. Operates from 4-wire data bus. Up to 12 of these can be used, increasing total zones (inputs) to 208.

The ELK-965 is a Low Battery Cutoff Module combined with a Master Power Switch. It is designed to work with virtually any 12 Volt control panel or power supply.
In the event of an extended power outage, the ELK-965 sensing circuit automatically disconnects the battery when the voltage falls below 10 Volts DC. This helps to prevent “deep discharging” of the battery. The convenient power switch permits the installer or user to easily disconnect both the Battery and the AC power from the control or power supply.

Trusted, professional grade step down transformer for low voltage systems, such as Access Control, Security & CCTV.