Shop KERI SYSTEMS INC. | Brands We Sell

Keri’s 1386AKHD-I Multi Technology Card allows the user to combine several identification technologies in a single credit-card-thin credential. One of the most popular features of the Multi Technology Card is that it can accept a direct print video image, typically a photograph, bar code, and other user graphics, from most industry dye sublimation printers, to create a custom access credential.

The Keri Systems KC-10X-50 is a 50-pack of standard, light proximity cards for use in access control systems. These proximity cards fit comfortably in a wallet or purse, but can also be worn on clothing or as a necklace clip. The cards are extremely durable and boast an excellent read range relative to their size. All cards features a vertical slot punch.

If you wish to purchase individual cards, take a look at the KC-10X.

The Keri Systems MS-5000BX is a smallest readers, 3.4 “long x 1.4” broad x 0.38” thick (86mm x 36mm x 10mm), and mounts to a metal window or door frame or wall. Up to 4 “ (10cm). The 4.3 “109mm long x 3.0” broad x 0.38” thick; may be installed on a single-gang electrical box or wall. Read range is up to 6” (15cm) when mounted at least one inch off metal. Read range will be decreased if the reader is placed using a metal electrical connection box. When used with a PXL-250, PXL-100, or IntelliProx, a beeper and multicolored LED indicate the reader’s status. MS-5000 MiniStar Reader is waterproof and shockproof.

Keri’s PXL-500 Controller hardware platform provides sophisticated access control solutions for up to 256 doors at a single site and thousands of doors spread over a number of remote sites. The unique architecture allows Keri to offer the system hardware at a lower cost compared to other manufacturers. It also contains many features that simplify and significantly reduce the cost of installation. The system is managed by Keri’s doors.NET software.

The Keri Systems NXT-2D-MSC has Mercury Firmware with 2 Doors/4 Readers. The NXT-2D Controller is designed for IT. Using a TCP/IP network eliminates controller cabling expenditures. Using affordable CAT-5 cable may lower network costs by up to 50% compared to standard hard-wired systems. The NXT-2D is incredibly clever and relies little on network traffic for decision making, saving important network capacity. Keri’s patented MAC addressing method provides reliable device detection and one-button autoconfiguration. Up to two 4X4 Input/Output boards (NXT-4X4) may be attached to the controller’s RS-485 trunks to increase system versatility (buses). Customers may pick between Keri’s 4-wire NXT Series Proximity Readers with reader supervision and In/Out reading (4 Readers), or any reader with a standard Wiegand output or MS Series Proximity Readers using the NXT-RM3 Reader Interface Module. doors.NET software offers a similar appearance and feel to Keri’s original DoorsTM program, but with

Medium Sized, NXT Reader – The NXT-5R measures 4.18 inches high by 2.95 inches wide by .625 inches deep (10.6 cm high x 7.5 cm wide x 1.6 cm deep) and can be mounted on a US single gang electrical box or flat on a wall. Read range is up to 6” (15cm) when mounted at least one inch off metal. If the reader is mounted using a metal electrical junction box with the thickness of the wall material separating the reader from the box, read range will be reduced.
NXT Readers can be ordered as “Entrance” or “Exit” readers when used with NXT Controllers (Mercury-Powered versions), which doubles the controller’s reader capacity. For “Exit” readers, specify model numbers with an E at end of model number (i.e., NXT-3RE). They can now be configured to read certain HID 125 KHz cards and tags such as the HID ® Prox II Credentials, thus providing all of the benefits listed above and eliminating the need for an NXT-WI or NXT-RM3 Reader Interface Board.

Keri’s KPS-3 Power Supply provides an open frame power solution with an ultra compact footprint, providing your design with more space and efficiency. The Power Supply provides 12VDC @ 2.8A and has a 1.5A battery charging circuit. The supply has a perforated cover (for cooling) mounted in standard Keri enclosure (no enclosure option available). It works with the PXL-500, NXT, and NXT-MSC controllers. It supports a direct 100 VAC to 240 VAC input at 50 Hz and 60 Hz, no transformer required.

Keri Systems KB-HUB Borealis Hub Communicator, Open Hardware Combatilibilty, Provides Communications and Auto-Updater Service between Borealis Cloud and Access Controller Panels, 32 Doors Max per Hub

Keri’s LAN-520 provides Ethernet connectivity for PXL and Entraguard controllers using a plug-in, Ethernet module to replace direct RS-232 serial connections or (now obsolete) modem connections for data transfer between doors.NET software and the controllers themselves. All PXL and Entraguard controllers can be connected, individually, via TCP/IP to take advantage of the existing Ethernet LAN/WAN.

Keri’s 1326AKHD Standard Light Proximity Card provides maximum read range performance in a package considerably thinner than other “clamshell” proximity cards. It can be easily carried in a wallet or purse or worn on the clothing with a clip or necklace. These cards are extremely durable and convenient. The are manufactured with a vertical hanging slot punch, and they come with a lifetime warranty.