Shop KERI SYSTEMS INC. | Brands We Sell

The smallest MicroStar Reader
3.4? x 1.4? x 0.38? (86 mm x 36 mm x 10 mm) with a read range of up to 4? (10 cm). Lifetime warranty.
Keri’s MS Series Proximity Readers are designed to blend aesthetics, read range performance, and small package size with an extremely thin profile into a product that is priced significantly less than competing proximity readers. The readers are for use exclusively with Keri’s access control system based on the PXL-500 Tiger Controller and can be used with the NXT-2D/-4D and MSC-2D/4D Controllers when using a Interface Module, to save cost and continue the use existing credentials when upgrading to the newer NXT controllers.

The AP-10X Adhesive Proximity Patch from Keri others all the flexibility of other Keri proximity credentials, but in a form factor that allows it to be attached to virtually anything. As with any Keri proximity device, it will read through most non metallic surfaces.

Pyramid Series Proximity from Farpointe Data sets the electronic security benchmark for 125-kHz proximity readers, cards, and tags. Based upon proven contactless digital radio frequency identification (RFID) technology, Pyramid readers interface with a wide range of electronic access control systems by complying with the Wiegand communication protocol. They offer value-add features such as MAXSecure and fleaPower, and can be ordered to support several proximity card and tag technologies. Additionally, Pyramid cards and tags are passive devices, eliminate maintenance by requiring no battery, and can be ordered to support several proximity reader technologies.

Pyramid Series Proximity from Farpointe Data sets the electronic security benchmark for 125-kHz proximity readers, cards, and tags. Based upon proven contactless digital radio frequency identification (RFID) technology, Pyramid readers interface with a wide range of electronic access control systems by complying with the Wiegand communication protocol. They offer value-add features such as MAXSecure and fleaPower, and can be ordered to support several proximity card and tag technologies. Additionally, Pyramid cards and tags are passive devices, eliminate maintenance by requiring no battery, and can be ordered to support several proximity reader technologies.

The Keri Systems KC-10X is a standard, light proximity card for use in access control systems. These proximity cards fit comfortably in a wallet or purse, but can also be worn on clothing or as a necklace clip. The cards are extremely durable and boast an excellent read range relative to their size. All cards features a vertical slot punch.

Pyramid Series Proximity from Farpointe Data sets the electronic security benchmark for 125-kHz proximity readers, cards, and tags. Based upon proven contactless digital radio frequency identification (RFID) technology, Pyramid readers interface with a wide range of electronic access control systems by complying with the Wiegand communication protocol. They offer value-add features such as MAXSecure and fleaPower, and can be ordered to support several proximity card and tag technologies. Additionally, Pyramid cards and tags are passive devices, eliminate maintenance by requiring no battery, and can be ordered to support several proximity reader technologies.

Smallest NXT Series Reader – Measuring just 3.75 inches high by 1.60 inches wide by .625 inches deep (9.5 cm high x 4.1 cm wide x 1.6 cm deep), the NXT-3R is one of the smallest proximity readers on the market. It is designed to mount directly on metal or a wall with out mounting brackets or spacers.
The Exit reader is installed into the same reader bus as the Entry reader, and within doors.NET you can enable the Exit reader for Entry/Exit Configurations from a Single reader bus.
NXT Readers can be ordered as “Entrance” or “Exit” readers when used with NXT Controllers (Mercury-Powered versions), which doubles the controller’s reader capacity. For “Exit” readers, specify model numbers with an E at end of model number (i.e., NXT-3RE).
They can now be configured to read certain HID 125 KHz cards and tags such as the HID ® Prox II Credentials, thus providing all of the benefits listed above and eliminating the need for an NXT-WI or NXT-RM3 Reader Interface Board.