Search Results

SpectrAlert® Advance color lens LENSR attachments are easy to install to any indoor or outdoor SpectrAlert® Advance strobe devices to provide distinctive visual signaling. These lens attachments come in four color options (amber, blue, green, and red) for mass notification, severe weather, emergency response, and other non-fire applications. The lenses easily attach to any non-fire printed SpectrAlert Advance strobes, including horn strobes, speaker strobes, and strobe only devices. Each lens ships with a clear adhesive on the bottom surface. The lens is then aligned with the clear strobe and applied.

The System Sensor LENS-R2 is a red lens that can be used for any indoor wall-mountable strobe. L-Series color lenses come in four colors options including amber, blue, green and red. The lenses are compatible with L-Series strobes including wall or ceiling mount. Note that color lenses must only be used with devices that are not fire printed.

B110LP detector bases are designed for use with System Sensor® models 2151 photoelectronic and 1151 ionization detector heads. These 2-wire bases are equipped with screw terminals for power, ground, and an optional remote annunciator.
Certifications:
ULC Listed
FM

The System Sensor LENS-B2 is a blue lens that can be used for any indoor wall-mountable strobe. L-Series color lenses come in four colors options including amber, blue, green and red. The lenses are compatible with L-Series strobes including wall or ceiling mount. Note that color lenses must only be used with devices that are not fire printed.

System Sensor® SSM Series alarm bells are low-current, high-decibel notification appliances for use in fire and burglary systems or other signaling applications. They come pre-wired to reduce installation time, and also incorporate a polarized electrical design for use with supervision circuitry. With reliable performance, SSM Series alarm bells provide loud, resonant tones. They operate on 24 VDC and are motor driven.

The RTS2 is designed to work with InnovairFlex 4-wire conventional duct smoke detectors. The System Sensor RTS2 is an automatic fire detector accessory that tests remotely located duct detectors. They include a key switch that can be used to select one of two connected sensors to be tested, reset or both by a push-button switch.

B210LP mounting bases are six-inch, flanged bases for use with 200 Series detectors.

6500-MMK multi-mounting kits allow 6500 beam smoke detectors to be mounted to ceilings or to walls where the detector and reflector cannot be mounted within 10° of one another. When using the smoke detector, the distance piece BEAM-SMK is also required. One kit mounts either the transmitter/receiver unit or reflector.

The System Sensor LENS-BC2 is a blue lens that can be used for any indoor wall-mountable strobe. L-Series color lenses come in four colors options including amber, blue, green and red. The lenses are compatible with L-Series strobes including wall or ceiling mount. Note that color lenses must only be used with devices that are not fire printed.