Shop Egress Devices

The Bosch DS160 is a request-to-exit detector with a light gray enclosure featuring an 8 foot x 10 foot coverage area.
The DS160 also includes timers, a door monitor with sounder alert, and pointable coverage. Sounder volume is adjustable and sail-safe or fail-secure modes are selectable. With the keycard input, the sensor relay can be controlled by a card reader or access control system. The DS160 Series includes the DS160 Detector (light gray) and the DS161 Detector (black), both of which are developed exclusively for Request-to-exit (REX) applications. The DS160 and DS161 are equipped with timers, a door monitor with sounder alarm, and pointable coverage to accommodate the most rigorous REX requirements. Sequential Logic Input (SLI) provides a level of security not available in any other REX device.

The Bosch DS150i is a gray, request-to-exit PIR detector that signals an access control system or door control whenever motion is detected. The detector boasts a wrap-around coverage pattern and can be mounted on a wall or ceiling. The device includes an activation LED for visual status alerts. The DS150i Series includes the DS150i Detector and the DS151i Detector (black). They are created specifically for Request-to-exit (REX) programs. The DS150i and DS151i detect motion within their respective coverage areas and alert an access control system or door control device.

The Alarm Controls TS-2T is a momentary “PUSH TO EXIT” action switch for security and access control environments. Pressing the green button triggers a 2-45 second timer that will automatically reset if the button is pressed again before the timer subsides. The TS-2T is mounted to a single gang stainless steel wallplate. The TS-2T request to depart station, which comes with an electronic timer and a square push button, offers a practical option to leave the door unlocked for a predetermined period of time, facilitating simple entrance and escape. When the relay timer expires, the door will lock again.

The Alarm Controls TS-2T is a momentary “PUSH TO EXIT” action switch for security and access control environments. Pressing the green button triggers a 2-45 second timer that will automatically reset if the button is pressed again before the timer subsides. The TS-2T is mounted to a single gang stainless steel wallplate. The TS-2T request to depart station, which comes with an electronic timer and a square push button, offers a practical option to leave the door unlocked for a predetermined period of time, facilitating simple entrance and escape. When the relay timer expires, the door will lock again.

The Seco-Larm SD-7202GC-PEQ Illuminated Push-to-Exit Button comes in handy when one wants to regulate the comings and goings of the people in their home or workplace. With the installation of this exit button wall plate, those entering and exiting the premises are more manageable with a greater emphasis on security.

The large 2” (5 cm) square, illuminated, momentary push button is made for long mechanical durability, and the terminals to connect the wiring of the button to the exit are of either the screw terminal or solder terminal. The unit provides a single gang stainless steel back plate. The SD-7202GC-PEQ features beveled edges on all exposed surfaces and is furnished with standard slotted head screws. The device mounts directly to a standard UL.

The Securitron MK is a single, momentary, SPDT mortise keyswitch that turns a standard mortise cylinder into a full feature keyswitch.

The MK supports electric lock control, alarm panel arming, reset and override when paired with any mortise cylinder 1-1/8” to 1-1/2”.

Fully Programmable. Passive Infrared Detection. Warranty: 2 Years.

Illuminated green 2” square momentary pushbutton. NO/NC Contact, rated 3A@24VDC. Built-in timer (1~180 sec). Stainless-steel single-gang plate.

The Alarm Controls TS-14 is a request to exit green button with a momentary action switch and pneumatic time delay. The unit contans one normally-open and one normally-closed contact and has an adjustable time range of 2 seconds to 60 seconds. The station does not require power for timing function. The unit is on a single-gang faceplate. The TS-14 request to depart station, which has a push button and a pneumatic timer, offers a practical solution to leave the door unlocked for a predetermined period of time, facilitating simple entrance and escape. When the relay timer expires, the door will lock again.

The T-Rex is a sophisticated and cost-effective request to exit device for all access control applications and an alternative to installing an exit button. Outstanding innovations such as X-Y Targeting and Digital Signal Processing (DSP) implementation make the T.Rex the fastest and most reliable exit detector on the market.