Shop Keypads - Readers

The HID 5365EGP00 is a MiniProx Reader with pigtail leads and a standard 00 configuration that provides the most common reader functionality. Capable of being mounted indoors and out, the MiniProx card reader has a classic charcoal gray shell and a slim, attractive design.

The Paxton10 Slimline Reader combines multi-format technology with compact design (48mm width mullion mount) to perfectly complement the Paxton10 system.
The slimline reader is equipped with multi-format reading technology designed to simultaneously read the most common types of cards and tokens, including Paxton, EM, MIFARE® DESFIRE® CSN, HID® Prox 125kHz, FeliCa and NFC.
Installation – The reader wires are color coded and can be connected color for color to a Paxton10 Door or Video controller. Avoid mounting near other proximity readers as this may affect the read range. The cable exits centrally from the back of the reader making drilling and mounting very accurate.
The reader is supplied with 5 meters of cable and can be extended using Belden 8723 cable.
Operation – A token is read by holding it within close proximity of the reader. Once a token has been read the control unit looks up the access permissions of that user. Access is then granted or denied as appropriate.
The reader a

The HID-921NTNNEK00000 is a black, multiclass SE reader that features a keypad, RPK 40 Sub Class, Wiegand communication, a pigtail connection, and standard one key security. The 921NTNNEK00000 simplifies migration from legacy technologies with support Indala, AWID and EM4102, and provides customers the assurance that their existing investments can be leveraged to enhance their system as business requirements change.

The multiCLASS SE RPK40 is part of HID Global’s iCLASS SE platform for adaptable, interoperable access control. Designed for multi-factor authentication door applications requiring standard wall switch mounting, multiCLASS SE RPK40 supports a broad array of 13.56 MHz high frequency and 125 kHz low frequency credential technologies and a variety of form factors, including cards, fobs and mobile devices. Configurable to support HID Mobile Access®.

alarm.com’s Smarter Access Control is a powerful, easy-to-use solution for commercial properties that seamlessly integrates with the alarm.com for Business platform. This platform enables intelligent automation and features, such as disarming when badging in, locking doors when arming, and tagging access events on the video timeline. The X100 Two Reader Expansion Module adds support for two additional readers with four relay outputs and four programmable inputs to an alarm.com X1100 Door Controller. For larger commercial installations, up to 31 X100 expansion modules can be connected together to manage up to 64 doors using a single X1100 Door Controller.

The Keri Systems MS-5000BX is a smallest readers, 3.4 “long x 1.4” broad x 0.38” thick (86mm x 36mm x 10mm), and mounts to a metal window or door frame or wall. Up to 4 “ (10cm). The 4.3 “109mm long x 3.0” broad x 0.38” thick; may be installed on a single-gang electrical box or wall. Read range is up to 6” (15cm) when mounted at least one inch off metal. Read range will be decreased if the reader is placed using a metal electrical connection box. When used with a PXL-250, PXL-100, or IntelliProx, a beeper and multicolored LED indicate the reader’s status. MS-5000 MiniStar Reader is waterproof and shockproof.

Medium Sized, NXT Reader – The NXT-5R measures 4.18 inches high by 2.95 inches wide by .625 inches deep (10.6 cm high x 7.5 cm wide x 1.6 cm deep) and can be mounted on a US single gang electrical box or flat on a wall. Read range is up to 6” (15cm) when mounted at least one inch off metal. If the reader is mounted using a metal electrical junction box with the thickness of the wall material separating the reader from the box, read range will be reduced.
NXT Readers can be ordered as “Entrance” or “Exit” readers when used with NXT Controllers (Mercury-Powered versions), which doubles the controller’s reader capacity. For “Exit” readers, specify model numbers with an E at end of model number (i.e., NXT-3RE). They can now be configured to read certain HID 125 KHz cards and tags such as the HID ® Prox II Credentials, thus providing all of the benefits listed above and eliminating the need for an NXT-WI or NXT-RM3 Reader Interface Board.

The SK-1323-SDQ from Seco-Larm is an indoor and outdoor stand-alone keypad designed to control access of a single entry point for facilities with up to 1010 users. Each user is assigned a personal identification number (PIN), which releases an electric door lock or triggers a gate operation. All features are programmed directly from the keypad. There is no need for an external programmer. Each relay has a programmable output time from 1-99 seconds or toggle. Additional features includes a rugged aluminum construction, backlit keys for easy night time use and IP66 weatherproof rating for the harshest conditions.

P series readers are for use with Switch2 and Net2 systems. The reader is supplied with a black fascia only. Replacement fascias are available in black and white/grey from the Paxton Portal.
We have added Genuine HID Technology to the majority of our Paxton readers, they can now read HID 125kHz Proximity tokens, when licensed with an activation card. If required these readers can still be enabled to have Wiegand output, via a separate activation card.
Installation – The reader is wired as shown on the control unit label. Be sure to avoid mounting on metal surfaces or near other proximity readers as this will affect the read range. The cable exits centrally from the back of the reader making drilling and mounting very accurate.
Operation – A token is read by holding it within close proximity of the reader. Once a token has been read the control unit looks up the access permissions of that user. Access is then granted or denied as appropriate. If access is granted the green LED flashes.

The elegantly designed 212iLM-AL backlit keypad is suitable for indoor and outdoor installations. The iLM keypad mounts directly to mullion door frames or most flat surfaces with no backbox required. The convenience of the built-in doorbell feature with the iLM’s sleek design makes it an easy choice for entrance installations. Each of the iLM keypads has its electronics conformal coated during the manufacturing process to provide increased application flexibility.

The HID Signo Keypad Reader 40K is a founding member of the Signo platform. Offering a truly dynamic approach to secure electronic access control, HID Signo Readers are designed to be highly versatile, powerful, and connected for the future. A perfect fit for multi-factor authentication door applications requiring a narrow keypad reader, the HID Signo Keypad Reader 40K supports an unparalleled range of different credential technologies in a variety of form factors including cards, fobs and mobile devices.