Shop Keypads - Readers

Programmable via fingertip, the SK-1323-SPQ Stand-Alone Weatherproof Keypad with Built-In Proximity Reader from Seco-Larm is a weatherproof, rugged aluminum construction enclosure, which protects against the harshest weather. The metal housing is also specially designed to sustain the punishment and abuse of high traffic. It can be surface mounted with its aluminum housing or flush mounting on the wall.??It accommodates a single gang box and most keypad styles. The keypad is designed for basic access or code control for up to 1010 individual users from output one (1) and 10 users from output two (2). All features can be programmed directly from the keypad. There is no need for an external programmer.

KP readers are a keypad and a proximity reader all in one. This allows card plus PIN (or code) access control with a single reader. KP readers are for use with Switch2 and Net2 systems. The KP series keypads are supplied with black bezels only. Replacement bezels are available in black and white/gray, and are free of charge to Paxton registered installers from the Paxton Portal.
Installation – The reader is wired as shown on the control unit label. Be sure to avoid mounting on metal surfaces or near other proximity readers as this will affect the read range. The cable exits centrally from the back of the reader making drilling and mounting very accurate.
Operation – A token is read by holding it within close proximity of the reader. Once a token has been read if the reader has been configured for code/PIN this must then be entered using the keypad. The control unit verifies the information and grants or denies access as appropriate. If access is granted the green LED flashes. If acces

ioSmart Smart Cards and Multi-Technology Readers provide a cost-effective migration from older proximity cards to advanced smart card technology. This family provides enhanced security through end-to-end AES-128 encryption over RS-485 when used with Kantech’s KT-1 or newer KT-400 door controllers while it can be also used with any other access controller using Wiegand protocol. The readers are available in single-gang or mullion models with integrated backlit, capacitive touch keypad support for dual factor authentication and include an intuitive LED status bar that clearly indicates various access conditions to the user. These readers can be installed in a variety of indoor or outdoor applications.

The KP400 is a waterproof and vandal-proof digital keypad. The unit is residential, industrial, and commercial. Compatible with electronic locks. The keypad is protected from severe surroundings with metal backlit keys and a metal casing.

P series readers are for use with Switch2 and Net2 systems. The P series readers are supplied with black fascias only. Replacement fascias are available in black and white/gray, and are free of charge to Paxton registered installers from the Extranet. P series readers are available in four sizes.
We have added Genuine HID Technology to the majority of our Paxton readers, they can now read HID 125kHz Proximity tokens, when licensed with an activation card. If required these readers can still be enabled to have Wiegand output, via a separate activation card.
Installation – The reader is wired as shown on the control unit label. Be sure to avoid mounting on metal surfaces or near other proximity readers as this will affect the read range. The cable exits centrally from the back of the reader making drilling and mounting very accurate.
Operation – A token is read by holding it within close proximity of the reader. Once a token has been read the control unit looks up the access permissions

Indoor Flush-mount Keypad IEIs 232CVS is an indoor, flush-mount, single-gang keypad with a stainless steel faceplate and DPS contact delay. Three LEDs indicate unit operation status and offer visual confirmation of PIN entry. The keypad supports 120 users and has the ability to monitor door position. The keypad flush mounts to most single-gang electrical back boxes.