Browse Categories

Search in Category

Keypads - Readers

Shop by Category

Loading...

Shop Keypads - Readers

ACCESS CONTROL/Keypads - Readers 
Viewing Page 4 of 5 (46 results)
P50M MULLION MOUNT- HID OR PAXTON COMPAT

PAXTON ACCESS INC P50M MULLION MOUNT- HID OR PAXTON COMPAT

Item #: PAX-345-220-US

Supplier Part #: 345-220-US

P series readers are for use with Switch2 and Net2 systems. The reader is supplied with a black fascia only. Replacement fascias are available in black and white/grey from the Paxton Portal.
We have added Genuine HID Technology to the majority of our Paxton readers, they can now read HID 125kHz Proximity tokens, when licensed with an activation card. If required these readers can still be enabled to have Wiegand output, via a separate activation card.
Installation – The reader is wired as shown on the control unit label. Be sure to avoid mounting on metal surfaces or near other proximity readers as this will affect the read range. The cable exits centrally from the back of the reader making drilling and mounting very accurate.
Operation – A token is read by holding it within close proximity of the reader. Once a token has been read the control unit looks up the access permissions of that user. Access is then granted or denied as appropriate. If access is granted the green LED flashes.

IN STOCK

KANTECH MULTI-TECHNOLOGY READER SINGLE GANG BLK

Item #: KAN-KT-SG-MT

Supplier Part #: KT-SG-MT

Kantech’s ioSmart Smart Card Readers give customers an easy and powerful way to move from proximity cards to advanced smart card technology, whether they are using the popular Kantech ioProx solution or another proximity system. Multi-technology readers provide the option to read both prox and smart cards allowing the customers to migrate at their pace. ioSmart readers provide end-to-end AES 128-bit encryption between the ioSmart card and ioSmart reader when connected to KT-400 and KT-1 controller over RS-485 and aforementioned controllers to EntraPass software over IP.

IN STOCK
PROX AND KEYPAD READER SINGLE

CONTINENTAL ACCESS PROX AND KEYPAD READER SINGLE

Item #: CAC-CICRP640HA

Supplier Part #: CICRP640HA

The Continental Access Single Gang Proximity Reader & Keypad sets the electronic security benchmark for 125-kHz proximity readers, cards, and tags. Based upon proven contactless digital radio frequency identification (RFID) technology, Pyramid readers interface with a wide range of electronic access control systems by complying with the Wiegand communication protocol. They offer value-add features such as MAXSecureTM and fleaPowerTM, and can be ordered to support several proximity card and tag technologies. Additionally, Pyramid cards and tags are passive devices, eliminate maintenance by requiring no battery, and can be ordered to support several proximity reader technologies.

IN STOCK

CONTINENTAL ACCESS CASCADE MINI MULLION PROX RDR

Item #: CAC-CICRP-300HA

Supplier Part #: CICRP-300HA

The Continental Access Mullion Pyramid Proximity Reader sets the electronic security benchmark for 125-kHz proximity readers, cards, and tags. Based upon proven contactless digital radio frequency identification (RFID) technology, Pyramid readers interface with a wide range of electronic access control systems by complying with the Wiegand communication protocol. They offer value-add features such as MAXSecureTM and fleaPowerTM, and can be ordered to support several proximity card and tag technologies. Additionally, Pyramid cards and tags are passive devices, eliminate maintenance by requiring no battery, and can be ordered to support several proximity reader technologies.

IN STOCK
ALUMINUM MULLION KEYPAD/ILLUMI

NORTEK SEC & CONTROL/LINEAR ALUMINUM MULLION KEYPAD/ILLUMI

Item #: NIC-212ILM-AL

Supplier Part #: 212iLM-AL

The elegantly designed 212iLM-AL backlit keypad is suitable for indoor and outdoor installations. The iLM keypad mounts directly to mullion door frames or most flat surfaces with no backbox required. The convenience of the built-in doorbell feature with the iLM’s sleek design makes it an easy choice for entrance installations. Each of the iLM keypads has its electronics conformal coated during the manufacturing process to provide increased application flexibility.

IN STOCK
0294022 2000 SERIES EM STYLE

NORTEK SEC & CONTROL/LINEAR 0294022 2000 SERIES EM STYLE

Item #: NIC-2000EM

Supplier Part #: 2000eM

The e-style keypad uses hardened backlit keys to ensure long-term durability and high-quality performance. e style keypads are designed for both indoor and outdoor flush mount applications. The electronics for each e keypad are conformally coated in the manufacturing process in order to provide this level of application flexibility.

IN STOCK
DESIGN SERIES OUTDOOR BACKLIT

NORTEK SEC & CONTROL/LINEAR DESIGN SERIES OUTDOOR BACKLIT

Item #: NIC-212ILW

Supplier Part #: 212iLW

The 212iLW keypad has chrome-plated metal trim with hardened backlit keys. There are LEDs shown through the faceplate to indicate operation status and provide the user confirmation of the PIN number entry. Designed for indoor or outdoor use, the iLW keypad mounts to any standard single-gang electrical back box and provides superior durability.

IN STOCK
PROX KP50 KEYPAD

PAXTON ACCESS INC PROX KP50 KEYPAD

Item #: PAX-355-110-US

Supplier Part #: 355-110-US

KP readers are a keypad and a proximity reader all in one. This allows card plus PIN (or code) access control with a single reader. KP readers are for use with Switch2 and Net2 systems. The KP series keypads are supplied with black bezels only. Replacement bezels are available in black and white/gray, and are free of charge to Paxton registered installers from the Paxton Portal.
Installation – The reader is wired as shown on the control unit label. Be sure to avoid mounting on metal surfaces or near other proximity readers as this will affect the read range. The cable exits centrally from the back of the reader making drilling and mounting very accurate.
Operation – A token is read by holding it within close proximity of the reader. Once a token has been read if the reader has been configured for code/PIN this must then be entered using the keypad. The control unit verifies the information and grants or denies access as appropriate. If access is granted the green LED flashes. If acces

IN STOCK
PROX KP75 KEYPAD UL APPROVED

PAXTON ACCESS INC PROX KP75 KEYPAD UL APPROVED

Item #: PAX-375-110-US

Supplier Part #: 375-110-US

Use with Switch2 or Net2. Keypad and proximity reader all in one. Range up to 100mm with PROXIMITY cards. Easy mounting. Low profile – less than 16mm deep.
About – KP readers are a keypad and a proximity reader all in one. This allows card plus PIN (or code) access control with a single reader. KP readers are for use with Switch2 and Net2 systems. The KP series keypads are supplied with black bezels only. Replacement bezels are available in black and white/gray, and are free of charge to Paxton registered installers from the Extranet.
Installation – The reader is wired as shown on the control unit label. Be sure to avoid mounting on metal surfaces or near other proximity readers as this will affect the read range. The cable exits centrally from the back of the reader making drilling and mounting very accurate.
Operation – A token is read by holding it within close proximity of the reader. Once a token has been read if the reader has been configured for code/PIN this must then be en

IN STOCK
PROXPRO WIEGAND GRAY KEYPAD LEAD FREE

PROXPRO WIEGAND GRAY KEYPAD LEAD FREE

Item #: HID-5355AGK00

Supplier Part #: 5355AGK00

The ProxPro proximity card reader’s weatherproof design and architecturally attractive enclosure allows easy mounting indoors or out. The ProxPro Reader is ideal for applications requiring a larger read range.

IN STOCK
  • « PREV
  • 1
  • 2
  • 3
  • 4
  • 5
  • NEXT »