Search in Category
Filter Your Search
Brand
Shop by Category
Shop Intrusion Accessories
DSC POWERSERIES PRO/NEO 8-HARDWIRED ZONE EXPANSION
Adds 8 hardwired zones
AUX power up to 125 mA (PTC protected)
DSC ENERGY EFFICIENCY PLUG-IN TRANSFORMER 16
The DSC PTD1640U is a plug-in wall AC power transformer designed for the DSC PowerSeries Neo, Honeywell VISTA-Series hardwired control panels and other compatible brands. The PTD1640U transformer has power specifications of 16.5VAC 40VA.
DSC POWERSERIES PRO/NEO PWR SUPPLY MODULE
Fully supervised for AC failure, low battery and AUX failure
Provides up to 1 Amp @ 12 VDC
Compatible with HS2016, HS2032, HS2064, HS2128 control panels
DSC POWERSERIES PRO/NEO HIGH CURRENT OUTPUT
Fully supervised for AC failure, low battery and AUX failure
4 programmable high current voltage outputs: rated at 1 Amp @ 12 VDC
Output #1 can be used as a supervised bell output
Provides up to 1 Amp @ 12 VDC
IQP4STAND-WHT - Qolsys IQ Panel 4 Desk Mount Stand (in White Color)
Table stand for IQ Panel 4 & IQ4 Hub (White)
8 ZONE EZM EXPANDER F/ALL (INCLDEZM3008)
Expands the capacity of the Gemini control panels by increasing their on-board zones in selectable increments of eight zones. The GEM-EZM8 is supported by the P816, P1632, P3200 and P9600.
Four-zone and 8-zone modules may be combined as necessary to supply the required number of zones.
Refer to the installation instructions for the control panel in use for wiring requirements for UL-listed applications
DSC POWERSERIES MAIN PANEL METAL CABINET
DSC PC5003c is the same cabinet that all the DSC Power Series alarm systems come with. It is approximately 12“x 12” and 3” deep. It is the largest cabinet available for the Power Series. This cabinet will hold up to three PC5108 / PC5208 expanders AND one large board such as a PC5204 OR PC5580 AND one small board such as the IT-100 data Interface board. It may be possible to house two large boards, however you would likely have to drill mounting holes for at least one of the boards. This cabinet DOES NOT include a cabinet lock. Cabinet locks are available separately
DSC UL LISTED TRANSFORMER F/THE WTK5504 WIRE
The DSC 9VADAPTER-US is the 9VDC, 1.25A Power Adapter designed for use with various DSC Keypads. The transformer works with the DSC WTK5504, DSC WS9LCDWF9, and the DSC HS2LCDWF9 Keypads.
