Shop Communicators

Commercial Dual Path Fire IP / Cellular Alarm Communicator

The UD-2000 Digital Alarm Communicator Transmitter (DACT) provides for up to two (2) phone lines for communication to a monitoring station. The UD-2000 communicates using the SIADCS or Ademco Contact ID protocols. When enabled, the DACT automatically monitors each phone line or voltage and has the ability to seize the line and connect with a remote receiver. Once the communication is complete, the DACT will hang up.
The DACT is provided with terminal blocks for each phone line and two RJ45 cords. In order for the DACT to work properly, it must be installed on a plain old telephone service (POTS) line or equivalent deemed by the authority having jurisdiction. The DACT must be installed before any other equipment to ensure it can seize the phone line.
Phone lines are high voltage and should be run in a separate conduit from other circuits. The wire conductors connecting the DACT to the phone system should be 26 AWG or larger.

5G LTE-M Universal Dual Path Commercial Fire Alarm Cellular Communicator

Universal Dual Path Cellular Commercial Fire Alarm Communicator connected by Verizon 5G LTE-M that supports any brand 12V to 24V Fire Alarm System.

Universal Dual Path Cellular Commercial Fire Alarm Communicator connected by AT&T 5G LTE-M that supports any brand 12V to 24V Fire Alarm System.

Universal Dual Path Cellular Commercial Fire Alarm Communicator with a locking metal enclosure connected by Verizon 5G LTE-M that supports any brand 12V to 24V Fire Alarm System.

6820EVS intelligent addressable fire alarm control panels with emergency voice system can connect up to 17 panels with convenient single point communications.

UL 2572 listed for mass notification, Includes built-in 50 watt amplifier; upgradeable to 100 watts, Allows for 14 field-programmable messages

The Alula BAT-FIRE-VZ is a universal dual-path internet/cellular Verizon 5G LTE-M commercial fire alarm communicator. The BAT-FIRE-VZ communicator connects to an intrusion or fire alarm control panel (FACP) and provides central station alarm reporting. The BAT-FIRE-VZ can be configured to provide dual-path connectivity using Ethernet/broadband and cell or single-path connectivity using either Ethernet/broadband or cell to Bosch Conettix D6100IPv6 receivers at the central station. The BAT-FIRE-VZ allows system integrators to save money, maximize install flexibility and skip the 4G cellular sunset.

The BAT-FIRE-VZ provides inputs that can be used to monitor an FACP’s alarm, AC fail, and trouble points (dry contact outputs). In this topology BAT-Fire inputs will be connected to the FACP points (dry contact outputs). The communicator will continually monitor the state of the FACP points (dry contact outputs). A state change on a BAT-FIRE-VZ monitored FACP point (dry contact output) will