Search Results

Shunt ON/OFF 2 terminals, SPST
Maintained ON-OFF, key removable from both ON and OFF positions
Commonly used as ON/OFF switch to arm/disarm alarm or shunt zone
12VDC, 2 Amps max.
Key Number – 1305

The E-941Sx series of electromagnetic locks is the ideal way to secure a door against unauthorized entry. When power is applied to the electromagnetic lock, it creates an extremely strong magnetic field. The electromagnet is strongly attracted to the steel armature plate which is mounted on the secured door. Once the electromagnet is deactivated, the secured door will function normally without any residual magnetism.

Stainless-steel plate Momentary push-button switch with ring guard with Exit and Salida

The ENFORCER Ultra-Low-Light Active Deterrence Turret Camera combines 4K-resolution with Active Deterrence. Using a Sony CMOS sensor and ultra-low-light technology, the camera adjusts color information to provide clear images even in dark environments. With Active Deterrence the camera uses AI to distinguish between environmental issues and actual threats and uses red/blue LEDs and sound to warn off intruders, for significantly increased security.

The ENFORCER HDMI Extender over Single Cat5e/6 extends the range of traditional HDMI cabling methods by using an active transmitter and receiver to send video and audio over a single Cat5e/6 cable. HDMI formats as large as 1080p can be transmitted up to 164ft (50m) between the two units with zero signal loss by using integrated circuits in the receiver and transmitter. The extender also supports HDMI loop output, EDID management settings, and one way IR control for remotely controlling HDMI sources and displays.

A new surface-mount bracket designed for a clean and aesthetically pleasing installation of SECO-LARM rim strikes. Works with all SECO-LARM rim strikes used with Pullman latch pushbars. Concealed Wiring: Protects and hides wiring for a clean look.

This functional mirror includes a small camera mounted on the back, allowing you to discreetly monitor babysitters, customers, hallways, and more. Its 3-axis mounting arm facilitates flexible installations, while the OSD (On-Screen Display) provides convenient programming of advanced features, such as brightness, digital wide dynamic range (DWDR), white balance, backlight compensation (BLC), motion detection, privacy, etc.

The ENFORCER 4-in-1 Multi-Purpose Siren/Strobe is multiple communication and signaling devices in one: siren, internal message, broadcast, and (SH-816S-SMQ only) an LED strobe. It can connect to an external source to serve as a public address system in daily use. Depending on circumstances or application it can also sound a warning siren, playback your pre-recorded message or custom sound from internal memory, and/or be used as a PA broadcast system.

The ENFORCER 4-in-1 Multi-Purpose Siren/Strobe is multiple communication and signaling devices in one: siren, internal message, broadcast, and (SH-816S-SMQ only) an LED strobe. It can connect to an external source to serve as a public address system in daily use. Depending on circumstances or application it can also sound a warning siren, playback your pre-recorded message or custom sound from internal memory, and/or be used as a PA broadcast system.

Easy 2-wire installation, regardless of voltage
If the strobe light is being powered by a backup battery, as the battery is drained, the strobe light will continue to function
Perfect for “informative” burglar alarm use
Incorrect polarity cannot damage circuit or draw current
Low current consumption with long operating lifespan of over 300 continuous hours (2,000,000 flashes)
Lens is made of high-impact and heat-resistant acryrex and case is made of high-impact resistant black ABS plastic
Comes with protective inner cover, which protects the high-voltage Xenon tube when the colored lens has been removed.