Search Results
SECO-LARM 24VDC/VAC TO 12VDC .8AMPS
ENFORCER Power Converters “step down” voltage, converting low-voltage AC or DC into regulated DC outputs. These converters are useful for DC CCTV cameras, access controls, and many other applications where low-voltage DC output is required.
SECO-LARM 600LB DOUBLE DOOR MAG W/ BOND
The E-941Dx series of electromagnetic locks is the ideal way to secure a door against unauthorized entry. When power is applied to the electromagnetic lock, it creates an extremely strong magnetic field. The electromagnet is strongly attracted to the steel armature plate which is mounted on the secured door. Once the electromagnet is deactivated, the secured door will function normally without any residual magnetism.
SECO-LARM L BRACKET FOR 600LB MAGLOCK
“L” brackets are also available for special-use mounting applications where space is insufficient for mounting the magnet
SECO-LARM 3/8 STUBBY PRESS-FIT MOUNT N.C.
3/8? Quick-Connect Terminal Recessed-Mount Magnetic Contact – White, 3/4? (19mm) Gap, Closed loop, UL Listed
SECO-LARM REQUEST TO EXIT PLATE
Programmable Red/Green Round Button, with “EXIT” & “SALIDA”
SECO-LARM 3/4" STEEL DOOR RECESSED-MOUNT MAGNETIC
3/4? Steel-Door Recessed-Mount Magnetic Contact – White, 1? (25mm) Gap, Closed loop, UL Listed
SECO-LARM GATE MAGLOCK 1200LB FACE MNT
The SECO-LARM Electromagnetic Gate Lock with Weldable Bracket combines a strong and durable gate lock with a weldable bracket for ease of installation and greater security. With variants of both 1,200-lb (544kg) and 600-lb (272kg) holding force, it is suitable for almost any gate installation and can be installed horizontally and vertically.
SECO-LARM 900 MG 2 BUTTON RF TRANSMITTER
The ENFORCER 900MHz HL-series RF transmitters and receivers use digital modulation for improved immunity to interference, better signal penetration in environments with heavy obstructions, and significantly longer range of up to 1,800ft (550m)* line of sight. The transmitter’s ultra-low power consumption gives you longer battery life with easy to obtain coin-type batteries (CR-2032).
SECO-LARM 12VDC, 18 OUT PUT, 30AMP
The ENFORCER 12VDC Switching CCTV Power Supply is an efficient solution for powering CCTV installations. Each unit distributes power to multiple CCTV devices and provides short circuit and overheat protection.
SECO-LARM 2 BUTTON HANDHELD REMOTE
Make access control, security, home automation, gate operation, or any type of product wireless with RF transmitters and receivers from SECO-LARM. Regardless of project, SECO-LARM RF equipment is a profitable, easy-to-install add-on for any application.
