Search Results

The ENFORCER Outdoor Wave-to-Open Sensor is a full-featured exit plate using IR technology to allow egress from a protected area or activate a device with the simple wave of a hand. Since no touch is required, this sensor is suitable for use in hospitals, clinics, labs, cleanrooms (to reduce the risk of contamination), schools, factories, or offices.

Make access control, security, home automation, gate operation, or any type of product wireless with RF transmitters and receivers from SECO-LARM. Regardless of project, SECO-LARM RF equipment is a profitable, easy-to-install add-on for any application.

Overhead Door Magnetic Contact, 2-3/4? (70mm) Gap, Open/Closed loop (3 Wires)

The ENFORCER Stand-alone / Wiegand proximity reader is an advanced security solution that offers both efficiency and convenience. This versatile device can function as a stand-alone controller or a Wiegand reader. The reader’s unique feature of adding multiple cards in bulk at once significantly streamlines access control management in large organizations.

The ENFORCER E-964-Q Series Quad-Photobeam Sensors are ideal for long-distance protection. Four selectable beam frequencies allow for superior perimeter protection by eliminating crosstalk and interference between multiple units. False alarms created by animals and falling leaves are minimized by the sensor’s detection method of all 4 beams simultaneously broken.
The E-964-Q Series of sensors is designed to work in even the most extreme conditions. A built-in heater automatically turns on and off depending on the outside temperature. An environmental control output senses a slow degradation in beam strength when weather conditions worsen preventing false alarms.

Designed to carry wiring to conduct power to electric locks or access systems
Once mounted, simply remove cover to access. Door cord stays in place. No need to remove from the door. Prevents stripping of the screws and mounting points
Surface-mounted
15” (39cm) Stainless steel armored cord
Inside door-cord diameter: 5/16” (8mm)
Outside door-cord diameter: 7/16” (11mm)
End cap dimensions: 2-3/16?x7/8?x1-9/16?
Security screws (included) prevent tampering

Make access control, security, home automation, gate operation, or any type of product wireless with RF transmitters and receivers from SECO-LARM. Regardless of project, SECO-LARM RF equipment is a profitable, easy-to-install add-on for any application.

The ENFORCER Siren/Strobes are multi-purpose devices: siren, speaker, and optional strobe (SH-816S-SQ only). It can serve as a regular siren, but also has an audio input that can be used to playback audio or broadcast messages. The SH-816S-SQ series also includes a strobe light with a choice of amber, blue, clear, or red lenses and can be surface installed or to a standard single gang, double gang or C-type back box.

The ENFORCER SK-1011-SDQ is a single-output, indoor access control keypad that doesn’t scrimp on the important features. It supports up to 1,000 users and 50 temporary visitors and can be surface mounted with the included back box or flush mounted in a standard single-gang back box. It includes a tamper alarm, and a backlit keypad for ease of use at night or in dark areas.

ENFORCER LED Strobe Lights provide all the functions of a regular strobe light and much more. Each has an operating life of 50,000 hours—over 160 times that of a regular strobe light. No more bulbs to replace! The SAQ series includes a unique placement of LEDs making the light more visible from various directions, a 9V backup battery option making them ideal for continuous lighting applications, and 8 selectable strobe patterns, adjustable duty cycle, and adjustable strobe speed. The SAQ series also includes a built-in 100db siren.