Search Results

The SECO-LARM Electromagnetic Gate Lock with Weldable Bracket combines a strong and durable gate lock with a weldable bracket for ease of installation and greater security. With variants of both 1,200-lb (544kg) and 600-lb (272kg) holding force, it is suitable for almost any gate installation and can be installed horizontally and vertically.

The ENFORCER Weather-Resistant Mushroom-Cap RTE Plates are ideal for many outdoor access situations, with a 1-1/2? (38mm) diameter mushroom-cap (green or red), single-gang faceplate and NO/NC contact rated 50A@24VAC.

Electromagnetic Gate Lock with brackets for armature and magnet, face mount, weldable. The E-942FC-1K3SQ is primarily designed for swinging gates.

Capsule-Type Quick-Connect Terminal Surface-Mount Magnetic Contact – White, 1? (25mm) Gap, Closed loop

The ENFORCER Siren/Strobes are multi-purpose devices: siren, speaker, and optional strobe (SH-816S-SQ only). It can serve as a regular siren, but also has an audio input that can be used to playback audio or broadcast messages. The SH-816S-SQ series also includes a strobe light with a choice of amber, blue, clear, or red lenses and can be surface installed or to a standard single gang, double gang or C-type back box.

Industrial Wide-Gap Magnetic Contact, 3? (76mm) Gap, Open/Closed loop (3 Wires)

ENFORCER Power Converters “step down” voltage, converting low-voltage AC or DC into regulated DC outputs. These converters are useful for DC CCTV cameras, access controls, and many other applications where low-voltage DC output is required.

The SECO-LARM-E-942FC-600 electromagnetic gate lock with brackets for armature and magnet is designed to prevent unauthorized visitors from gaining entry to your home or business.

This electromagnetic lock (mag-lock) was designed for outdoor use to keep sliding and swinging electric gates securely closed. It has 600 pounds of holding force and, when power is applied to the magnetic lock, it turns on the unit’s powerful, built-in electromagnet. The lock can be triggered by a security system, relay switch, or even with a standalone RF transmitter and receiver system.

The ENFORCER DIP-Switch Coded Transmitter uses a DIP switch to set the code. Suitable for applications requiring large numbers of transmitters with identical codes. A secured site might want all engineers on a project to have access to the same buildings, while another working group might need access to a different set. Similarly, a gated community might want to have one code for all residents, with the ability to change the code if transmitters are lost or stolen.

Shunt ON/OFF 2 terminals, SPST
Maintained ON-OFF, key removable from both ON and OFF positions
Commonly used as ON/OFF switch to arm/disarm alarm or shunt zone
12VDC, 2 Amps max.
Key Number – 1305