Shop Access Control Accessories

Allows desk mounting of master and/or handset station
Mounting hardware included
Station is propped up for easier viewing
Pre-drilled mounting holes
Constructed with sturdy ABS plastic
Adjustable to 45° or 60° angles

The Alarm Controls RT-1 is a package that includes two wireless transmitters and a receiver.

The receiver can accept a maximum of 30 transmitters, and it is outfited with an LED status indicator. The receiver also features a built-in five second relay on release and a cover designed to hide screw terminals for a clean installation.

One transmitter comes with a keychain.

With the use of a single device, wireless remote transmitters enable access control for up to three doors. The best choice for front desk/reception applications or challenging to wire settings. Built to operate with keypads, electric strikes, magnetic locks, gate operators, and door operators. Channel receiver, transmitter, mount, and keychain are all included in the kits.

Surface-mounted stainless-steel cables, designed to conduct power to electric locks or access systems mounted in doors.

Form C relay for 18-24V DC intercom systems
Contacts have a higher rating than stock units
Both normally open and normally closed output options

Steel mounting bracket for DIN rail devices

The Energy Transfer Hinge (ETH) is the ideal way to pass low voltage power from the hinge jamb to the lockset without having any exposed wires. These hinges are commonly used with electric mortise & cylindrical locks, electric strikes (when on a pair of doors), electric exit trims, latch pullback devices, door mounted card readers and low voltage door lights. Wire Quantity: 4, Wire Gauge: 26, Continuous Amps (@24VDC): 1.0. Hinge Dimensions: 4.5” H x 4.5” W. In Satin Chrome.

The Alarm Controls DL-1 is an 18”-long, N-cap door loop designed for use with access control devices. Abrasion-resistant steel jacket ensures durable performance over time. The DL-1 comes with mounting hardware for easier installation. To carry low-voltage electrical current from the door frame to the door, an 18” armored door loop is employed. End caps are either plastic (DL-1) or an aluminum alloy (DL-2). Includes mounting hardware.

The Keri Systems NXT-RM3 Reader Interface Module is designed to make it easy to connect reader technologies with industry standard Wiegand output to NXT Controllers. It also allows connection of Keri MS Series Proximity Readers, most commonly used for legacy systems where PXL-500 Controllers are also in place being used with KC-10X, MT-10X, or PKT-10X credentials.

The NXT-RM3 securely plugs directly onto an NXT Controller or an NXT-4X4 or GIOX I/O Expansion Module with excellent mechanical and electrical integrity. The option to bring the reader terminations to the I/O modules provides substantial savings in wiring costs because door functions can be located closer to the reader/door, with only 4 wires required to be cabled to centrally located controllers.

The Alarm Controls RT-1T is a wireless transmitter that is compatible with the RT-1 receivers. With the use of a single device, wireless remote transmitters enable access control for up to three doors. The best choice for front desk/reception applications or challenging to wire settings. Built to operate with keypads, electric strikes, magnetic locks, gate operators, and door operators. Channel receiver, transmitter, mount, and keychain are all included in the kits.

Keri’s KPS-3 Power Supply provides an open frame power solution with an ultra compact footprint, providing your design with more space and efficiency. The Power Supply provides 12VDC @ 2.8A and has a 1.5A battery charging circuit. The supply has a perforated cover (for cooling) mounted in standard Keri enclosure (no enclosure option available). It works with the PXL-500, NXT, and NXT-MSC controllers. It supports a direct 100 VAC to 240 VAC input at 50 Hz and 60 Hz, no transformer required.