Shop Wireless

4 programmable function keys
Visual and audible indicator to acknowledge requested action
Full 3-seconds delay on panic function to reduce false alarms
Certified with ULC Wireless Commercial Burglary Listing under ULC-S304-16 Standard – an industry first in Canada!*
*Only applicable in Canada

Long-lasting battery life – up to 5 years with typical use under standard conditions
Auxiliary input can be used to easily connect a standard hardwired contact
IP66 dust-tight and waterproof rating ensures dependable operation even in extreme conditions
Tamper-resistant
Contact and temperature detector in one, when enrolled as part of the PowerSeries Pro system. Temperature is shown on the User App.
Fast installations using link quality LED indicators and pull-tab device auto enrollment
Wide-gap tolerance reduces false alarms caused by wind, or by animals bumping outdoor gates and enclosures
Compatible with PowerSeries Neo, PowerSeries Pro and Qolsys panels

The GEM-GB is an advanced wireless acoustic glass-break detector for use with all Gemini-Series control panels and receivers. Each transmitter has a unique RF ID code (printed on the sensor module and on the rear case) that distinguishes itself to the receiver. Refer to control-panel instructions for entering this code and its checksum digit into the panel. Be sure to enter all numbers and/or letters, including leading zeros, if any.

16 Zone hardwire to wireless translator with 319.5 MHz S-Line Encryption certified for Residential Fire

Glass Break Detector with 319.5 MHz S-Line encryption

Carbon Monoxide detector

Programmable temperature warning and alarm thresholds
Detects extreme cold, freezer fault and extreme heat
Provides up to four selectable temperature alert points
Optional probe to monitor refrigerator, freezer and outdoor temperatures
Battery life 7 years with typical use
Visible signal quality indicator helps to choose the optimal location for installation without going back and forth to the keypad
Wall or ceiling mount
Front and back tamper
Fully supervised
Dimensions: 3.19 × 1.25 × 1in.
Compatible with PowerSeries Neo, PowerSeries Pro and Qolsys panels

The Mini Door/Window Sensor is a supervised, wireless sensor that detects the opening and closing of doors or windows. New, high–powered Microchip delivers exceptional range; 360° with no “dead spots” or signal drop-offs. Patented design with an isolated antenna 1/8” above board and separated from batteries for superior RF performance and transmission efficiency. Substantially reduced interference from metal door and window frames. Reduced battery energy draw—lengthens the battery life.

High-performance contact detector perfect for protecting windows and doors in high-traffic residential and commercial sites
Optional, configurable auxiliary input enables installation of additional hardwired devices when necessary
Tamper-resistant
Visible signal quality indicator helps to choose the optimal location for installation without going back and forth to the keypad
Configured from the keypad – no need to re-open the detector once closed
Long-lasting battery life – up to 5 years in commercial setting
Contact and temperature detector in one, when enrolled as part of the PowerSeries Pro. Temperature is shown on the User App.
Compatible with PowerSeries Neo, PowerSeries Pro and Qolsys panels

advanced PIR sensor designed for use with Napco’s GEM-Series wireless receivers