Shop Wireless

Wireless Motion Sensor with Pet Immunity

Innovative Octa-Quad™ technology distinguishes between a moving person, swaying trees, and small animals
Market-leading mirror optics offer exceptionally high detection sensitivity and immunity to false alarms
Range: 40 ft.
Vandal-resistant design through patented V-Slot technology
Pet-immune – Target Specific Imaging™ distinguishes between humans and pets weighing up to 40 lbs.
Compatible with PowerSeries Neo, PowerSeries Pro and Qolsys panels

The Alula RE930RPV is a cellular Verizon LTE expansion card designed for the Connect+ control panel. The RE930RPV alarm communicator module can be added to expansion in slot 1 the Connect+ panel. The RE930RPV provides alarm reporting and interactive services to be offered over the Verizon network as either primary or back-up communication paths.

The Alula RE118 Flood and Temp Sensor is an integrated environmental sensor. It detects flood conditions and reports extreme temperatures.

The Alula RE111P protect residential installs, without the fear of false alarms caused by man’s best friend. This sleek, yet modest PIR is designed to monitor for human-sized movement, while intelligently tolerating pets.
The Indoor Motion Sensor alarms when motion is sensed or when the external contact is opened. It is battery-powered and requires no installation tools. A Pyroflex sensor with HighBar signal processing allows for industry-leading pet immunity and catch performance.

The Seco-Larm SK-910RBQ is a one channel receiver that can be used to control a garage door opener, house lights, alarm control panel, or other remote devices.

RF reception is indicated by a blinking LED. The receiver can learn to a maximum of 15 transmitters and is simple to connect thanks to its built-in screw terminals. A mode switch on the device can be used for easy transmitter learning.

The RF-Panic-One-Button-319 is a wireless hand-held device that is used as a portable panic or life-safety device, programmed into a 319.5 MHz control panel. False alarm feature; 2-second button hold or 2 quick presses to send signal to the panel and onto central station for assistance. 2-second hold and 2 quick presses prevents false alarm from unintentional button press/bump. The Wireless Panic is powered by a replaceable 3-VDC, Lithium coin-cell battery.

Description:
The Extended Door/Window Sensor is a supervised, wireless sensor that detects
the opening and closing of doors or windows. The sensor and magnet are mounted using screws (included) or
double-sided adhesive tape (included).
When activated, the sensor transmits an
open (trip) or close (restore) signal to the
panel. These are the signals the unit
provides: supervisory, tamper, and low battery (as needed). The sensor is powered by (2) replaceable 3- VDC, lithium coin-cell batteries.

The M1XRFTWM two-way wireless transceivers allow an ELK-M1 or ELK-M1EZ8 control to accept Elk’s complete line of two-way wireless sensors. The ELK-M1XRFTWM has been optimized to provide superior signal reception and reliability in multi-transceiver applications.
The ELK-M1XRFTW has been replaced by the ELK-M1XRFTWM. The ELK-M1XRFTWM performs all the functions of the ELK-M1XRFTW and is suitable for single or multiple transceiver installations.
Do NOT mix ELK-M1XRFTW and ELK-M1XRFTWM transceivers in a single M1 installation.