Shop Wireless

The Wireless Touch Screen Keypad (2GIG-TS2-E) is a wall-mounted, full-color, touch screen interface that provides many of the same easy-to-use keypad functions available on the control panel. It is designed for indoor use only and gives users the ability to control lights, thermostats, and door locks, as well as to view the status of every sensor zone.
When the 900 MHz Transceiver Module (2GIG-XCVR2-345 / 2GIG-XCVR2E-345) is installed in the control panel, the system can be programmed to communicate with up to four (4) Wireless Touch Screen Keypads.

The 2GIG 345MHz Repeater is designed to work with 2GIG security systems providing more flexibility in where wireless sensors can be installed. The 2GIG Repeater can be installed in the optimal location to extend the range of 2GIG panels for large jobs. The 2GIG 345MHz Repeater will repeat 2GIG and Honeywell sensor signals to 2GIG panels. The Repeater is a plug and play device that will immediately start repeating signals when powered on. The rechargeable battery provides backup power in case of AC power loss.

Colorless, tasteless, odorless but deadly, carbon monoxide (CO) is impossible to detect without a warning device. The WS4933 provides frontline protection against the silent threat of carbon monoxide poisoning.
Slim-line design
Built-in 85dB alarm at 10 ft (3 m)
Malfunction supervision
Low sensitivity supervision
Electrochemical sensing technology
Transmits RF status, low battery and tamper condition
Hush feature
Wall tamper with anti-tamper lock feature
4-5 year battery life
Onboard LED indicator
End-of-Life (EOL) indication (5 year)
Low battery supervision
Compatible with IMPASSA and PowerSeries v4.5 & higher

The Alula RE629 is a Connect+ encrypted wireless glassbreak detector used to monitor against the sound of broken glass up to 20 feet away. The RE629 glassbreak detector has four sensitivity levels that you can adjusted, making it more flexible for each application. The RE629 glassbreak detector is compatible for sending alarm signals to the Alula Connect+ wireless security system. When sensor detects breaking glass, the LED will turn on for 5 seconds. The glassbreak detector also has low battery supervision and a cover tamper to increase the reliability that it will work when you need it. For quick and easy mounting of the sensor, the RE629 comes with included tape and anchors.

Based on the Acuity® glassbreak detector
2 lithium batteries included
Tamper-activated test mode: should be tested using the AFT-100 glassbreak simulator

Activation via 2 large, easy to use buttons
Integrated LED to indicate signal transmission and acknowledgement
Built-in buzzer for audible indication
Water resistant
Multifunction clip and neck strap
Full 2-second delay on panic button
Safety Mechanism for preventing false panic calls
Prolonged battery life (7 years with typical use)
Supplied with a belt clip, a key chain, and a lanyard necklace
Dimensions: 53 × 33 × 11mm (2.1 × 1.3 × 0.43in)
Certified with ULC Wireless Commercial Burglary Listing under ULC-S304-16 Standard – an industry first in Canada!*
*Only applicable in Canada

Mini Door/Window Sensor with 319.5 MHz S-Line encryption in Brown plastic

The Alula RE122 NanoMax is the smallest full-featured security transmitter in the industry. It is typically used to sense opening and closings of doors and windows, but can secure just about anything using its Strip & Stick external contact holes. It will alarm when the magnet is pulled away from the NanoMax or when the external contact is opened.

The Alula RE622 is an encrypted, low-profile, wireless door or window contact designed to be used with the Alula Connect+ Panel. The RE622 sensor detects opening and closings of doors and windows. It can secure just about anything that opens with its simple peel-and-stick mounting solution. The RE622 will alarm, when the Connect+ Panel is armed and the magnet is pulled away from the contact.

The RF-ROR series (Radio Frequency Rate-of-Rise) and the hardwire version of wireless heat detectors use electronic processing to detect and report rising heat conditions. The micro-processor trips the on-board transmitter when the temperature at the detector location reaches a fixed temperature of 135°F (57°C) or 200°F (93°C).