Shop Alarm Controls | Brands We Sell

The Alarm Controls AM6325 is an adjustable angle bracket for 1200 series magnetic locks. The door header bracket permits magnetic lock adjustment.

The Alarm Controls TS-2-2T request to exit station with electronic timer and square push button allows for quick admission or egress. When the relay timer expires, the door locks.

The Alarm Controls AM6331 is a spacer plate for all models of the 1200 series double magnetic locks. The plate can be used to lower a magnetic lock by 1/4”. The unit features a clear anodized aluminum finish.

The Alarm Controls TS-9T is a request to exit timer mounted on a 1.75” stainless steel wallplate. The unit features a green rectangular pushbutton labeled Push To Exit and a high brightness LED. The timer will activate when the pushbutton is depressed and additional activations of the switch will restart the timer.

Bracket mounted, single magnetic lock with 1200 lbs holding force that can be easily installed without special tools and used with any access control system. Ideal for high-use areas for traffic control in interior applications. Available with LED, bond sensor and door status signalling options.

Use the REB-1A to permit escape through an electronically secured door, but be sure to adhere to all applicable building and fire codes. REQUEST TO EXIT BAR USAGE NOTES: Consult your local building and/or fire prevention codes and regulations to confirm installation. A fire-rated door that needs a fire-rated latch cannot use the REB-1A. However, there are some situations when fire doors are allowed on openings without the need for a fire rated barrier. Always check with your local building code and/or fire prevention agency before using the REB-1A.

The Alarm Controls TS-14N is a request to exit green button with a momentary action switch and pneumatic time delay. The unit contans one normally-open and one normally-closed contact and has an adjustable time range of 2 seconds to 60 seconds. The station does not require power for timing function. The unit is on a narrow faceplate. The TS-14 request to depart station, which has a push button and a pneumatic timer, offers a practical solution to leave the door unlocked for a predetermined period of time, facilitating simple entrance and escape. When the relay timer expires, the door will lock again.

The KP400 is a waterproof and vandal-proof digital keypad. The unit is residential, industrial, and commercial. Compatible with electronic locks. The keypad is protected from severe surroundings with metal backlit keys and a metal casing.

Single gang remote wall plate with hole for Piezo sounders and buzzers.