Shop Alarm Controls | Brands We Sell

The Alarm Controls TS-2T is a momentary “PUSH TO EXIT” action switch for security and access control environments. Pressing the green button triggers a 2-45 second timer that will automatically reset if the button is pressed again before the timer subsides. The TS-2T is mounted to a single gang stainless steel wallplate. The TS-2T request to depart station, which comes with an electronic timer and a square push button, offers a practical option to leave the door unlocked for a predetermined period of time, facilitating simple entrance and escape. When the relay timer expires, the door will lock again.

The Alarm Controls TS-2T is a momentary “PUSH TO EXIT” action switch for security and access control environments. Pressing the green button triggers a 2-45 second timer that will automatically reset if the button is pressed again before the timer subsides. The TS-2T is mounted to a single gang stainless steel wallplate. The TS-2T request to depart station, which comes with an electronic timer and a square push button, offers a practical option to leave the door unlocked for a predetermined period of time, facilitating simple entrance and escape. When the relay timer expires, the door will lock again.

The Alarm Controls TS-14 is a request to exit green button with a momentary action switch and pneumatic time delay. The unit contans one normally-open and one normally-closed contact and has an adjustable time range of 2 seconds to 60 seconds. The station does not require power for timing function. The unit is on a single-gang faceplate. The TS-14 request to depart station, which has a push button and a pneumatic timer, offers a practical solution to leave the door unlocked for a predetermined period of time, facilitating simple entrance and escape. When the relay timer expires, the door will lock again.

Bracket mounted, single magnetic lock with 600 lbs holding force that can be easily installed without special tools and used with any access control system. Ideal for high-use areas for traffic control in interior applications. Available with LED, bond sensor and door status signaling options.

Alarm Controls Corporation’s 600 pound Double Magnetic Lock, model 600D. The 600D provides a minimum of 600 pounds holding force for each lock and utilizes the ACC E-Z mount system for easy installation. The 600D is 12 or 24 VDC, jumper selectable and can be used with any access control system. E-Z mount system, No special tools required

The Alarm Controls AM3300 is a 1/2” spacer plate designed for the 600 series magnetic lock. The unit lowers the magentic lock by 1/2” and has a clear anodized aluminum finish.

The Alarm Controls AM3370 is a three piece Z bracket for 600 series single magnetic locks. The bracket has a clear anodized aluminum finish. For use on all single Magnetic 600 series locks from Alarm Controls Corporation, three (3) piece “Z” brackets. For use with in-swing doors, use the AM3370 Z bracket.

The Alarm Controls TS-9T is a request to exit timer mounted on a 1.75” stainless steel wallplate. The unit features a green rectangular pushbutton labeled push to exit and a high brightness LED. The timer will activate when the pushbutton is depressed and additional activations of the switch will restart the timer.

The Alarm Controls AM6370 is a three-piece Z bracket for 1200 series single magnetic locks. Clear anodized metal bracket for in-swinging doors.

Built to provide 1200 lbs of holding force, per door, for double door configurations, this easy to install magnetic lock includes LED status indicator, bond sensor and door status sensor to signal a powered and securely locked door. Ideal for interior or exterior applications.