Shop Alarm Controls | Brands We Sell

The Alarm Controls RT-1T is a wireless transmitter that is compatible with the RT-1 receivers. With the use of a single device, wireless remote transmitters enable access control for up to three doors. The best choice for front desk/reception applications or challenging to wire settings. Built to operate with keypads, electric strikes, magnetic locks, gate operators, and door operators. Channel receiver, transmitter, mount, and keychain are all included in the kits.

The Alarm Controls 1200LBDURO is a magnetic lock with a 1200 lb holding force that is equipped with an LED, bond sensor and door status sensor. The lock features a medium bronze finish.The Alarm Controls 1200LB-DURO is a magnetic lock with a 1200 lb holding force that is equipped with an LED, bond sensor and door status sensor. The unit has a duranodic bronze finish.

Single magnetic lock that is bracket attached, has a holding force of 1200 lbs, and may be used with any access control system. Ideal for traffic control applications inside of high-use zones. Available with options for LED, bond sensor, and door status signaling.

The Alarm Controls MCK-4-2 is a SPDT alternate action, single gang mortise cylinder key switch station. The mortise cylinder key switch station has been designed to accommodate all standard mortise cylinders from 1-1/8 to 1-1/4 in length. A spacer is required when used with 1-1/4 cylinder. Mortise cylinder key switch stations for single or narrow gangs. Alternate action switches alternate between being open (disconnected) and closed (connected) each time they are pressed, while momentary action switches are active only while they are depressed. LED alternatives are available.

The Alarm Controls 1200D-DURO is a double door magnetic lock with a 1200 lb holding force. The unit is equipped with a bond sensor, a door status sensor and a red & green status LED. The lock features a duranodic bronze finish.

The TS-14302 request to exit station with pneumatic timer and push button, provides a convenient way to keep the door unlocked for a specified amount of time, allowing for easy entry or egress. The door will relock when the relay time has expired.

The DUC-9C from Alarm Controls is a 1200D Magnetic Lock Dress-Up Cover Polished Chrome.

Alarm Controls EB-1 Push Button has a 1-1/2” inch red mushroom button labeled “Exit” and has a single gang stainless steel wall plate.

The 10C(25) from Alarm Controls is a Knurled Aluminum Guard Ring.

Remote wall plates with single indicating push buttons that change from black to orange when depressed. Ideal for applications where zone shunting is required.