Search in Brand
Filter Your Search
Category Group
Shop by Category
Shop Alarm Controls | Brands We Sell
MAGLACK DOUBLE BRACKETS
The Alarm Controls AM3375 is a five piece Z bracket used on all 600 series double magnetic locks. The bracket is designed for use on in-swining doors and features a clear anodized aluminum finish.
MORTISE CYLINDER KEYED ALIKE W/TWO KEYS
The Alarm Controls CY-1A is a standard 1-1/8” mortise cylinder used with the MCK weatherproof mortise stations. The cylinder is equipped with 2 keys and are keyed alike.
L BRACKET F/600S 600LB & 600L 1"X1.5"
The Alarm Controls AM3320 is an angle bracket for the 600 series single magnetic lock. The bracket is used to extend the door header. Fixed and adjustable options for single and double locks
ALARM CONTROLS ARMATURE PLT F/1200 SERIES MAGNETIC LOCK
The Alarm Controls AM6335 is an armature plate for all 1200 series magnetic plates.
L BRACKET F/1200D 1"X1.5"
The Alarm Controls AM6326 is an L bracket for the 1200D series double magnetic locks.
U.L LISTED SAME AS TS-2T W/ADDITIONAL S.
The Alarm Controls TS-2-2T request to exit station with electronic timer and square push button allows for quick admission or egress. When the relay timer expires, the door locks.
U.L DIA.METAL PUSHBUTTON D.P.D.T 4 A
The Alarm Contacts TS-13 is a request to exit momentary action switch with a vandal resistant 3/4” brass nickel plated pushbutton and DPDT contacts. The switch is mounted on a narrow stainless steel wallplate. The narrow stile TS-13 request-to-depart station offers a practical way to secure an exit door while still allowing egress in an emergency. Push buttons with vandal resistance are made for use in indoor, outdoor, commercial, and industrial settings. Both variants come with a timed relay for uses where a door needs to stay open for a set period of time.
ALARM CONTROLS ADJUSTABLE ANGLE BRACKET F/1200 SERIES S
The Alarm Controls AM6325 is an adjustable angle bracket for 1200 series magnetic locks. The door header bracket permits magnetic lock adjustment.
REQUEST TO EXIT PUSH BAR
Use the REB-1A to permit escape through an electronically secured door, but be sure to adhere to all applicable building and fire codes. REQUEST TO EXIT BAR USAGE NOTES: Consult your local building and/or fire prevention codes and regulations to confirm installation. A fire-rated door that needs a fire-rated latch cannot use the REB-1A. However, there are some situations when fire doors are allowed on openings without the need for a fire rated barrier. Always check with your local building code and/or fire prevention agency before using the REB-1A.
