Shop Alarm Controls | Brands We Sell

The Alarm Controls DL-1 is an 18”-long, N-cap door loop designed for use with access control devices. Abrasion-resistant steel jacket ensures durable performance over time. The DL-1 comes with mounting hardware for easier installation. To carry low-voltage electrical current from the door frame to the door, an 18” armored door loop is employed. End caps are either plastic (DL-1) or an aluminum alloy (DL-2). Includes mounting hardware.

The Alarm Controls RT-1T is a wireless transmitter that is compatible with the RT-1 receivers. With the use of a single device, wireless remote transmitters enable access control for up to three doors. The best choice for front desk/reception applications or challenging to wire settings. Built to operate with keypads, electric strikes, magnetic locks, gate operators, and door operators. Channel receiver, transmitter, mount, and keychain are all included in the kits.

Bracket mounted, single magnetic lock with 1200 lbs holding force that can be easily installed without special tools and used with any access control system. Ideal for high-use areas for traffic control in interior applications. Available with LED, bond sensor and door status signalling options.

The Alarm Controls TS-60 request to exit station with pneumatic timer and push button keeps the door unlocked for a preset duration. The door relocks when the relay time expires. Large 2-1/2” red mushroom push button for quick entry or exit.

The Alarm Controls AM3310 is an armature housing for the 600 series magnetic locks. The housing is ideal for use on freezer and extra thick doors. AM3310 Armature housing for the 600 Series, clear anodized, 7-7/8“L x 2-1/8“W x 5/8“D (US28)

The Alarm Controls TS-2-2 is a request to exit station that has DPDT contacts and an illuminated green button. The device is installed on a single-gang stainless steel electrical plate.

The Alarm Controls AM6361 is a 1/2” filler plate for all 600 and 1200 series magnetic locks. The plate is used when the door stop is narrow.

Magnetic gate lock with 1200 lbs of holding force provides weather resistant access control for perimeter applications. Ideal for sliding or swinging gates.

Double magnetic lock with 600 lbs of force, per door, allows control of both doors within a double door configuration. Bracket mounted and easy to install double magnetic locks can be used with any access control system and are available with LED, bond sensor and door status signaling to ensure a securely powered and sealed double door.

The Alarm Controls AM3305 is a 5/8” spacer plate designed for the 600 series magnetic lock. The unit lowers the magentic lock by 1/2” and has a clear anodized aluminum finish.