Shop Alarm Controls | Brands We Sell

The Alarm Controls SREX-100 is an active infrared request to exit sensor for indoor applications. It’s U.L.-listed as a request-to-exit device under UL294 and CAN/ULC-S319. The SREX-100 is rated a class 1 as per the CAN/ ULC-S319 standard. The SREX-100 mounts above the door header so its detection pattern is over the door handle. The exit device releases when the user reaches for the door handle. The active detecting curtain rejects parallel traffic and items put beneath it to keep the entryway safe.

The Alarm Controls RP-22 is a single gang stainless steel wall plate with a 1-1/8” hole for an SC628 sonalert.

The Alarm Controls AM3331 is a 1/4” spacer plate for all 600 pound double magnetic locks. The plate has a clear anodized aluminum finish.

The Alarm Controls AM6305 is a 5/8” mounting plate for all 1200 pound single magnetic locks. The plate lowers the magnetic lock by 5/8”. The unit features a clear anodized aluminum finish.

The Alarm Controls DE-1 is a delayed egress station that will provide an effective means of locking an exit door while still providing egress during an emergency. Pushing the square green button on the DE-1 will start the irrevocable exit time. There is a two second nuisance feature which requires the button to be pushed and held before the timer will start. At this time, the alarm relay will be energized and the sounder and light will turn on. At the end of the adjustable time delay (2 to 30 seconds), the lock relay is energized allowing the exit door to unlock.

The Alarm Controls AM3335 is an armature plate for all 600 series magnetic plates.

The Alarm Controls TS-12 request to exit station with vandal-resistant push button locks an exit door while allowing emergency escape. Vandal-resistant push buttons are used inside, outdoors, commercially, and industrially. This type has a timed relay for applications that need the door unlocked for a certain time.

The Alarm Controls MCK-4-4 is a DPDT alternate action, single gang mortise cylinder keyswitch station. The mortise cylinder keyswitch station has been designed to accommodate all standard mortise cylinders from 1-1/8 to 1-1/4 in length. A spacer is required when used with 1-1/4 cylinder.

The flexible, compact AES-300 electric strike offers value and innovation in one compact product. The small body design eliminates the need to cut out the dust box during installation, making this a great option for retrofit applications where size restraints may occur. Offering up to 1/4 inch horizontal adjustability, the AES-300 is ideal for cylindrical locksets with a latch up to 5/8 inch throw without a deadbolt.