Shop POTTER ELECTRIC SIGNAL CO. | Brands We Sell

The SCA amplifiers are a new addition to the Potter proprietary P-Link device catalog. Potter offers seven variations of amplifiers with wattages up to 100W to support small, medium, and hi-rise applications. The amplifiers have the capability to distribute up to two audio channels simultaneously across multiple speaker zones. Each amplifier is supplied with a stacker terminal block to provide accommodations for 8 Class B or 8 Class A speaker outputs. The SCA amplifiers offer output power at 25VRMS and 70VRMS.

The LFH horn offers a 520Hz square wave, temporal 3 tone. A jumper selection is available for normal or loud decibel tone. A temporal 4 pattern is available when used with the Potter GTSM Synchronization Control Module.
The LFH is equipped with a universal 4” metal mounting bracket which incorporates the popular Super-Slide® feature that allows the installer to easily pre-wire the system and test for supervision. The product also features a locking mechanism that secures the signal to the bracket without showing any screws and the Checkmate® – Instant Voltage Verification Feature which allows the installer to check the voltage drop, current draw, and match against the blue print.
The LFH Series is a high quality, low profile, audible appliance designed to meet the NFPA 72 requirements to install low frequency (520Hz) signaling in sleeping rooms.

Enables system to incorporate 2 way communication. Included with /P panels.

The SCM-4 module is used to monitor the contact status of a dry contact device (i.e, pull station, waterflow switch, etc) that contains a normally open contact. The SCM-4 can be programmed in the panel to supervise either a Normally-open or Normally-close contact on the Fire Alarm Control Panel (FACP). When the Normally-open contact is selected, and the contact is closed, the SCM-4 reports its condition to FACP. Likewise when the Normally-close contact is set as supervising condition, and the contact is opened, the MCM reports its condition to FACP. SCM-4 supervises an open circuit of wiring connected to the terminal C and NO.

SCM-4 employs one red LED to indicate the status. In normal condition, the LED flashes. When the contact is activated, the LED will turn on constantly. In case of open circuit, the LED will turn off. Since the system allows maximum 13 LEDs on devices to turn on constantly, if system already has 13 lighted LEDs on devices, SCM-4 will not turn on the LED and keep

The Multi-Connect expander (MC-1000) allows up to sixty-three (63) IPA and AFC/ARC series fire alarm control panels to share a single reporting technology. Each MC-1000 supports communication between the host reporting panel and two client panels. The MC-1000 communicates with the host and client control panels via the Potter P-Link communication bus. The MC-1000 can be mounted in either the control panel cabinet, the intelligent power supply/p-Link repeater, the PSN-1000e, AE-2, AE-8 or the AE-14 expander cabinet. each card is mounted to the exclusive Stacker Bracket for secure and accessible mounting.

The SHX-52 is a patented indoor/outdoor, self-contained, 8 ohm, 15 watt speaker. The full featured speaker consists of a light weight, strong polycarbonate housing and dual-action plunger switch for tamper supervision for a normally closed loop. The speaker does not require additional modules, metal boxes, tamper switches, special tools, or training to install and operate. The SHX-52 series comes completely assembled and ready for installation. It is ideally suited for noisy, heavy, machinery areas, warehouses, loading docks, print shops, and busy production floors, or for indoor/outdoor applications where high quality and high output warning is required. The SHX-52S Speaker Strobe is also available. It includes all of the great SHX-52 features with the addition of a colored strobe