Browse Categories

Search in Brand

POTTER ELECTRIC SIGNAL CO.

Shop by Category

Loading...

Shop POTTER ELECTRIC SIGNAL CO. | Brands We Sell

Searching for: potter-electric-signal-co
Viewing Page 21 of 22 (212 results)
LOCAL OPERATOR CONSOLE

POTTER LOCAL OPERATOR CONSOLE

Item #: POT-LOC-1000

Supplier Part #: LOC-1000

The LOC-1000 local operator console is used to control system operations and ECS from remote areas to navigate the building occupancy safely and effectively to the nearest exits. The Potter Panel Programmer utilizes a priority structure to allow the IPA-4000V or local operator consoles with the highest priority control of the system. Operations such all call, individual zone paging and ECS activation can be made directly at the LOC-1000. The panel is equipped with a supervised auxiliary input to interface with low-level audio sources and background music compatibility. A maximum of 30 LOC-1000’s can be linked with the IPA-4000V.

NOT IN STOCK
SB-24 SWITCHBOARD W/24 PROGRAM SWITCH

POTTER SB-24 SWITCHBOARD W/24 PROGRAM SWITCH

Item #: POT-SB-24

Supplier Part #: SB-24

The SB-24 provides 24 programmable push buttons for speaker zone and ECS message assignment. Each button has two corresponding status LEDs to indicate activity and trouble conditions. The SB-24 is equipped with a bracket for secure mounting. A maximum of four (4) SB-24’s may be installed on the IPA-4000V and LOC-1000.

NOT IN STOCK
NOT IN STOCK
SWITCH ASSY REPLACEMENT VSR # 1029030

POTTER SWITCH ASSY REPLACEMENT VSR # 1029030

Item #: POT-VSR

Supplier Part #: VSR

The Model VSR is a vane type waterflow switch for use on wet sprinkler systems. It is UL Listed and FM Approved for use on steel pipe; schedules 10 through 40, sizes 2” thru 8” (50 mm thru 200 mm). LPC approved sizes are 2” thru 8” (50 mm thru 200 mm). See Ordering Information chart. The VSR may also be used as a sectional waterflow detector on large systems. The VSR contains two single pole, double throw, snap action switches and an adjustable, instantly recycling pneumatic retard. The switches are actuated when a flow of 10 GPM (38 LPM) or more occurs downstream of the device. The flow condition must exist for a period of time necessary to overcome the selected retard period.

NOT IN STOCK
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • NEXT »

The following web pages were found that match your search