Shop Wireless

Description:
The RF-SHK-345 is a wireless window sensor designed for dual protection; open and close and to detect vibrations made by an intruder attempting to break a window. The sensor contains a piezo detection device that detects vibrations when mounted on a window frame. The detection circuit can be adjusted for sensitivity during installation to ensure maximum coverage. The device also has a built-in reed switch to monitor the open and close of the door or window.
When activated, the sensor transmits a signal to the control panel. These are the signals the unit provides: supervisory, tamper and low battery (as needed). The sensor is powered by (2) replaceable 3- VDC, lithium coin-cell batteries.

The Inovonics high power repeater with transformer intelligently amplifies transmission from any EchoStream series transmitter while ignoring background noise. The repeater is perfect for large facilities such as multi-floor buildings, multi-building sites, shopping malls, campuses and other open-air installations. Virtually any number of repeaters can be added to a system, scaling the system size as needed.
NOTE: For repeaters purchased after January 2023, please use the BAT851 Repeater Replacement Battery Assembly. For those purchased prior to January 2023, continue to use the BAT850 Repeater Replacement Battery Assembly.

The 2GIG Outdoor Wireless Contact Sensor expands the reach of security systems to outdoor areas, providing timely notification when outdoor gates or doors are opened. Able to handle harsh temperature conditions, this sensor is ideal for wide gaps when a typical contact sensor is insufficient.
The 2GIG Outdoor Wireless Contact Sensor will ship with a 2-year limited warranty.

The Alula RE653 is a Connect+ encrypted, weatherproof, wireless outdoor PIR motion detector. The RE653 protects outdoor areas with two IR sensors, for advanced animal immunity, and transmits an alarm when motion is sensed from up to 15 feet (5 meters) away. The RE653 is battery-powered and enclosed in a IP55 weatherpoof casing to operate in harsh environmental conditions.

The RE30 is a Universal Translator Battery Pack for Alula products. 

The RF-ROR series (Radio Frequency Rate-of-Rise) and the hardwire version of wireless heat detectors use electronic processing to detect and report rising heat conditions. The micro-processor trips the on-board transmitter when the temperature at the detector location reaches a fixed temperature of 135°F (57°C) or 200°F (93°C).

Description:
The Recessed Door/Window Sensor is a supervised, wireless sensor that detects the opening and closing of doors or windows. The sensor and magnet are recessed mounted into the frame.
When activated, the sensor transmits an open (trip) or close (restore) signal to the panel. These are the signals the unit provides: supervisory and low battery (as needed). The sensor is powered by (1) replaceable 3-VDC, lithium battery.

The Alula RE930RPA is a cellular AT&T LTE expansion card designed for the Connect+ control panel. The RE930RPV alarm communicator module can be added to expansion in slot 1 the Connect+ panel. The RE930RPA provides alarm reporting and interactive services to be offered over the AT&T network as either primary or back-up communication paths.

The 2GIG-CP-DESK Go!Control Desktop Kit allows your 2GIG GC2 control panel to sit at two different viewing angles. Bumper pads on the equipment protect furniture and prevent sliding. Works with any 2GIG GC2 Go!Control panel.
Product Features:
Allows panel to sit at two different viewing angles.
Sleek form factor
. Bumper pads to protect furniture & prevent sliding.
Works with any Go!Control panel

The Alula RE218 Honeywell Compatible Wireless Flood & Temp Sensor is an integrated environmental sensor. This sensor is designed to detect flood conditions and extreme temperatures and can be configured to report custom high and low-temperature trip points. Heat alarms when over 100 degrees F and Freeze alarms when under 45 degrees F.