Shop Wireless

Wafer-thin profile
Visible link quality indicator on device
Fully supervised
Includes double-sided tape
Large transmission range enabling repeater-free installations
Easy to install and remove
Prolonged battery life (3 years with typical use)
Dimensions: 62 × 25.4 × 7.7mm (2.45 × 1 × 0.3in)
Available in white and brown colors

Delivers 360° motion detection from a ceiling-mounted device
Fully secures large spaces with detection coverage up to 20m (65.6ft) in diameter
Ensures reliable performance using built-in PowerG leading-edge wireless intrusion technology with two-way communication
Advanced True Motion Recognition™ algorithm differentiates between intruders and other disturbances
Fast installations using link quality LED indicators
Easy pull-tab auto enrollment
Motion and temperature detector in one, when enrolled as part of the PowerSeries Pro system

The Alula RE667-Pro Slimline Touchpad is an intuitive interface for controlling the security system. It is AC powered and communicates with the panel wirelessly.

Wireless 319.5MHz heat detector that trips at a selectable temperature of 135°F (57°C) or 200°F (93°C), or when senses a rate of rise at 12°F to 15°F (6.7 to 8.3°C) per minute.

Designed for use with any standard normally open or normally closed contact, the EN1210-240 single input universal transmitter is fully supervised and includes case tamper and battery. The EN1210-240 single input universal transmitter sends check-in messages every 240 minutes to allow for use in a UL 2560 certified system.

The DSC TR5164-433 is a two-way wireless transceiver module that adds wireless capability to any DSC PowerSeries PC1616, PC1832 and PC1864 control panel. The TR5164-433 wireless receiver can support up to 4 wire-free keypads, 60 wireless zones and 16 wireless keys (wireless keys do not use up zone slots). The TR5164-433 receives signals from wireless zones and wireless keys, and provides information to the alarm controller it is connected to.

The Gemini Wireless RF Receiver is the hardwired
interface to NAPCO’s Wireless-Ready™ Gemini C-Series
control panels

The Alula identifies the sound of breaking glass and transmits a signal to the panel when mounted 4-25 feet from the protected window. Glass Break sensor is cost-effective way to extend the coverage area for any home or business.

Make access control, security, home automation, gate operation, or any type of product wireless with RF transmitters and receivers from SECO-LARM. Regardless of project, SECO-LARM RF equipment is a profitable, easy-to-install add-on for any application.

Compact sensor is inserted into the side of the door, barely discernable once installed
Ideal for residential and light commercial installations
Clear flanges attached to the sensor blend in with the doorframe and enable near-invisible installation regardless of the doorframe’s color.
Flanges on the sensor casing can be easily snapped off, to further reduce visual impact
White and brown adhesive covers (included) for the cap and magnet can be applied to match the door’s surface
Delivers exceptional value with a long-lasting battery (up to 10 years with typical use)
Easily installed, with an ultra-thin magnet (0.08 in) that reduces the need for drilling
Compatible with PowerSeries Neo, PowerSeries Pro and Qolsys panels